Just bought an RE to play~ mind if I join in this discussion to contribute
Yesterday got some test. Settings as below (briefly)
FSB: 540
Multiplier: 8
divider: 200/667
Voltages:
CPU: 1.35v
CPU VTT: 1.19v
CPU PLL: 1.55v
vDIMM: 2v @ 7-6-5-18
vNB: 1.51v
GTLs:
CPU 0/2: +50mv
CPU 1/3: +10mv
NB: +40mv
1.5v SB: 1.55v
Others on auto
With this strap I was able to boot at tRD = 8 and Pass dual PI 32M
With 1.41v vNB I got BSOD right before I saw the desktop
With 333/1066 divider the machine was bootable but BSOD when loading Windows using tRD = 8
What's interesting is, compare with the anaxxtech's review (Rampage Formula)
It has a formula about the calculation if the machine will be able to POST or not using a certain tRD.
While 333/1066 divider's value is bigger then 200/667 in terms of theory we should be able to boot up and load to windows without a problem using the same tRD value.
The problem is, with 333/1066 divider tRD @ 8 is completely unstable while 200/667 can boot up and pass dual 32M, even memset to tRD = 7 for a memory benchmark (possible to pass PI as well, haven't tried)
Any suggestions and comments on that?
And, I have a problem on overclocking my CPU to 4.5Ghz, will post the problem later. Still looking for assisstance
(Sorry for my bad english)
EDIT: The scene as below
FSB 500 Multi 9 4500Mhz
vCore: 1.3875v 1.392v Load LLC Enabled
With this setting I can pass OCCT for 2 hrs mixed test
But in ORTHOS I wasn't able to Pass even 1 minute and always get the same error: Final Result Mismatch
It does not make a single difference by rising the vCore to 1.425v. However it do pass dueal PI 32M...that's confusing...please help
Reply With Quote
Bookmarks