Quote Originally Posted by jasonelmore View Post
Thanks Elite.. here are my settings.. Everything is set on auto right now.. i've played with all the voltages with no success but see if you can point me in the right direction... Thanks

SpeedStream-Disabled
Cmos Multiplier- 9x
FSB- 355
1066 Strap/Latch
FineTune- Enabled
DDR2-Auto
C1E- Disabled

Votages

All Voltages are now set on AUTO.. I went to Hardware Health to find these Voltages
CPU- 1.352
NB/SB- 1.192
DDR2- 2.032 Note- this is the SPD for my RAM. will run with 1.8 also
FSB- 1.280
Core 1 GTL- 0.63 VTT
Core 2 GTL- 0.67 VTT
MCH GTL- Auto Note: i have tried 0.64
CPU PLL- 1.5

If you need anymore settings let me know.. Thanks
im guessing u r trying to run the ram at 1066??? change the strap/latch to auto and the ddr2 to 1065MHz, then set the ddr voltage +.500v. the ram need alot for voltage for this mobo but run fine