UNOFFICIAL BIOSTAR TPower I45 M/B

[jasonelmore]

no my rams not the problem.. my ram is rated for 1000mhz and it will do it just fine.. right now with the setup above my RAM is running at 892Mhz.. Even with a higher overclock the ram still is'nt hitting 1000mhz unless i get up in the 390's or switch to a 8x multiplier by 400FSB.. i've pretty much ruled the RAM out...I will strap it to whatever neccessary to keep it under 1000 mhz so i know it's not the RAM giving me trouble. Please post your voltage settings AND Other bios settings.. Mushkin Redlines do not want more than 2.1 volts.. They will overclock fine at 2.1 volts to 1060 if need be.. Even if i set my FSB to 400 and my multi to 8x then my ram is only running at 1000mhz. but it will not show any video with these settings.. i know my ram runs find at 1000mhz becaue i've tried it on a different latch.. my bios settings is the problem.. do you guys see anything wrong?