"ASUS P5Q Deluxe discussion".

[BRSG]

Try a linpack test mate, it will prolly give errors... prime isn't 100% bulletproof, neither is Linpack but it's stresses harder...

Try this :

CPU Voltage: up a bot more Vcore eg 1.4 to try it out
CPU GTL Voltage Reference (0/2): AUTO
CPU GTL Voltage Reference (1/3): AUTO
CPU PLL Voltage: 1.56
FSB Termination Voltage: 1.24
DRAM Voltage: 2.04
NB Voltage: 1.26
NB GTL Reference: 0.62
SBridge Voltage: AUTO
PCIE SATA Voltage: AUTO

Also put in TRFC to 55 and Disable SRC

Been there, done that mate... With the same settings above, and after 50 runs of linpack this is the result:



as you can confirm at this post in the previous page: http://www.xtremesystems.org/Forums/...postcount=4420


Regarding to your settings suggestion, I'll try them out as soon as I install XP Pro SP3

30 cycles of Linpack at max memory, should give a pretty high confidence of stability...and it completes in a fraction of the time an 18 or 24 hour prime95 blend does...great Linpack interface here. I've found if my box lasts 30 cycles of Linpack, prime95 never finds any issues running 30+ hours.

http://www.xtremesystems.org/forums/...d.php?t=201670

With Linpack at max memory all I get is a Linpack program crash Had to choose one of the other options, custom, to test 1500MB of RAM...

The problem is that even after all these tests Vista crashes and I don't know why... Sometimes the computer is in idle mode, no stress program running and other times I have Folding@Home running in the background