Quote Originally Posted by cstkl1 View Post
ok dude to find ure magic 4ghz...
since ure using e8400..

set everything above except
multiplier 9
bus 445
...
run linpack on vista 64 diagnostic mode max mem say around 30-50 times..
up ure vcore until u get this stable and then use back the template above with the vcore...
cheers...

well the template above with tRFC 25 works like a charm for 4x1gb kit.. so the major difference might be..
u may actually lower the vNB... and keep a high tRFC .

also a good practise after u completedthe multi 9 bus 445 and set the fsb to 533 above.. when ure bios boots.. keep pressing tab etc.. and enter windows mem diagnostic mode..
and run like 5 runs etc just to make sure ure NB/ ram are ok... before u boot into windows.. cause it would be pointless.
Ok, please excuse me for my ignorance, just to make sure

I should set everything like you wrote and instead of 7.5 and 533 I should use 9 and 445?

Also is this Linpack you are talking about?
http://www.intel.com/cd/software/pro...mkl/266857.htm

And last what setting is "tRFC 25" ? I can't seem to find it Sorry again for my ignorance