Quote Originally Posted by BRSG View Post
Hi guys!
Just installed Windows XP Pro SP3 last night and kept prime95 running almost 9 hours with no errors:



After that I started LinX (aka Linpack) and made it run 50 times:



My bios settings for these tests:

AI Overclock tuner: Manual
CPU Ratio Setting: 8.0
FSB Strap to North Bridge: 333
FSB Frequency: 450
PCI-E Frequency: 101
DRAM Frequency: 1081
DRAM CLK Skew on Channel A1: AUTO
DRAM CLK Skew on Channel A2: AUTO
DRAM CLK Skew on Channel B1: AUTO
DRAM CLK Skew on Channel B2: AUTO
DRAM Timing Control: Manual (timings: 5-5-5-15)

CPU Voltage: 1.33125
CPU GTL Voltage Reference (0/2): 0.67
CPU GTL Voltage Reference (1/3): 0.64
CPU PLL Voltage: 1.56
FSB Termination Voltage: 1.24
DRAM Voltage: 2.04
NB Voltage: 1.30
NB GTL Reference: AUTO
SBridge Voltage: AUTO
PCIE SATA Voltage: AUTO

Advance CPU Settings
CPU Ratio Setting: 8.0
CPU VID: Disabled
C1E Suppport: Disabled
Max CPUID Value Limit: Disabled
Intel® Virtualization Tech: Disabled
Vanderpool Technology: Disabled
CPU TM Function: Disabled
Execute Disable Bit: Disabled

Now I'm going to test Folding@Home...
Nice. Pretty much the same settings as me. Although my vcore is somewhat lower.

Here are my 3.6 Ghz settings:

Code:
Ai Overclock Tuner 		[Manual]
CPU Ration Setting		[8.00]
FSB Frequency			[450]
PCIE Frequency			[100]
FSB Strap to North Bridge	[333 MHz]
DRAM Frequency			[DDR2-1080MHz]
DRAM CLK Skew on Channel A1	[Auto]
DRAM CLK Skew on Channel A2	[Auto]
DRAM CLK Skew on Channel B1	[Auto]
DRAM CLK Skew on Channel B2	[Auto]
DRAM Timing Control		[Manual]
 1st Information:		5-5-5-15-3-52-6-3
 CAS# Latency			[5 DRAM Clocks]
 DRAM RAS# to CAS# Delay 	[5 DRAM Clocks]
 DRAM RAS# Precharge		[5 DRAM Clocks]
 DRAM RAS# Activate to Prechar	[15 DRAM Clocks]
 RAS# to RAS# Delay		[Auto]
 Row Refresh Cycle Time		[Auto]
 Write Recovery Time		[Auto]
 Read to Precharge Time		[Auto]
  2nd Information:		8-3-5-4-6-4-6
  READ to WRITE Delay(S/D)	[Auto]
  Write to Read Delay(S)	[Auto]
  WRITE to READ Delay(D)	[Auto]
  READ to READ Delay(S)		[Auto]
  READ to READ Delay(D)		[Auto]
  WRITE to WRITE Delay(S)	[Auto]
  WRITE to WRITE Delay(D)	[Auto]
   3rd Information:		14-5-1-6-6
   WRITE to PRE Delay		[Auto]
   READ to PRE Delay		[Auto]
   PRE to READ Delay		[Auto]
   ALL PRE to ACT Delay		[Auto]
   All PRE to REF Delay		[Auto]
DRAM Static Read Control	[Disabled]
DRAM Read Training		[Disabled]
MEM. OC Charger			[Auto]
Ai Clock Twister		[Auto]
Ai Transaction Booster		[Auto]
 C/P: A1 A2 A3 A4 | B1 B2 B3 B4
 LVL: 13 13 13 13 | 13 13 13 13

******** Please key in numbers directly! ********
CPU Voltage			[1.21250]
CPU GTL Voltage Reference(0/2)	[0.630]
CPU GTL Voltage Reference(1/3)	[0.630]
CPU PLL Voltage			[1.56]
FSB Termination Voltage		[1.26]
DRAM Voltage			[2.02]
NB Voltage			[1.26]
NB GTL Reference		[Auto]
SB Voltage			[1.20]
PCIE SATA Voltage		[1.60]
*************************************************
Load-Line Calibration		[Enabled]
CPU Spread Spectrum		[Auto]
PCIE Spread Spectrum		[Auto]
CPU Clock Skew			[Auto]
NB Clock Skew			[Auto]
That is Prime95-Blend (12hrs+) stable. And linpack stable too