just the same adam -106 loadedOriginally Posted by n00b 0f l337
both me and paul will be trying again with the r14 but not for a month or so
just the same adam -106 loaded
both me and paul will be trying again with the r14 but not for a month or so
1. The first rule of Bench Club is, you do not talk about Bench Club
2. The second rule of Bench Club is, you do not talk about Bench Club
3. If someone says stop, goes limp, taps out, the the benching is over
4. No bummers in the batcave, apart from unkie dave
5. One Bench at a time
6. No air, no water
7. Benching will go on as long as they have to
8. If this is your first night at Bench Club, you have to Bench
very nice work bazx
Hwa Oc Team TÜRKİYE
thanks my friend good to see you in herevery nice work bazx
1. The first rule of Bench Club is, you do not talk about Bench Club
2. The second rule of Bench Club is, you do not talk about Bench Club
3. If someone says stop, goes limp, taps out, the the benching is over
4. No bummers in the batcave, apart from unkie dave
5. One Bench at a time
6. No air, no water
7. Benching will go on as long as they have to
8. If this is your first night at Bench Club, you have to Bench
finally got the side panels on the unit still not sure what colour to go with
atm blue the same colour as the chassis
i have also noticed the unit is starting to look like wall-e
back in the shed
Last edited by bazx; 01-05-2009 at 01:27 PM.
1. The first rule of Bench Club is, you do not talk about Bench Club
2. The second rule of Bench Club is, you do not talk about Bench Club
3. If someone says stop, goes limp, taps out, the the benching is over
4. No bummers in the batcave, apart from unkie dave
5. One Bench at a time
6. No air, no water
7. Benching will go on as long as they have to
8. If this is your first night at Bench Club, you have to Bench
Looks like Monster
Can You post final temperatures ?
What are dimension of it
Panels - maybe white ?
regards
http://WWW.PIOTRES.COM
My productions (phase-change and containers) : Click here to see links...
Phase-change units, cascades, chillers and Ln2/DI containers builder - contact : piotres@piotres.com
whats the final weight on this beast
Case: Corsair 400R
PSU: Corsair HX1000W
mobo: Maximus IV Gene
CPU: 2500K @ 4.2ghz 1.19 volts
RAM: Gskill Ripjaws 1866mhz 2 x 4 gigs
OS Drive: Kingston Hyper X ssd 120 gig
Graphics: XFX HD5850
Cooling: Corsair H100
OS: Windows 7 Pro 64 bit
@peter i am experimenting with using a tev for the r14 mounted on the back of the evap so the unit is not quite there as far as temps are concerned atm the 3rd stage has 1150 in
@Ozzfest05 i don't know but i cannot lift it
1. The first rule of Bench Club is, you do not talk about Bench Club
2. The second rule of Bench Club is, you do not talk about Bench Club
3. If someone says stop, goes limp, taps out, the the benching is over
4. No bummers in the batcave, apart from unkie dave
5. One Bench at a time
6. No air, no water
7. Benching will go on as long as they have to
8. If this is your first night at Bench Club, you have to Bench
nice one bazx i can just imagine it now , you going to a lan party and saying do you mind if i use my own cooling unit then you come into the room pushing the beast and it goes silent and all you hear is thye wheels creaking as you roll it along , nice quality of build, what was the overalll cost of building excluding the 100s of hours work you put in
i don't honestly know the cost of this unit in parts but more then 2k
1. The first rule of Bench Club is, you do not talk about Bench Club
2. The second rule of Bench Club is, you do not talk about Bench Club
3. If someone says stop, goes limp, taps out, the the benching is over
4. No bummers in the batcave, apart from unkie dave
5. One Bench at a time
6. No air, no water
7. Benching will go on as long as they have to
8. If this is your first night at Bench Club, you have to Bench
its a hell of a machine you've built there , thanks for sharing
that thing is a tank I wondering how much electicity its pulling from the socket
Case: Corsair 400R
PSU: Corsair HX1000W
mobo: Maximus IV Gene
CPU: 2500K @ 4.2ghz 1.19 volts
RAM: Gskill Ripjaws 1866mhz 2 x 4 gigs
OS Drive: Kingston Hyper X ssd 120 gig
Graphics: XFX HD5850
Cooling: Corsair H100
OS: Windows 7 Pro 64 bit
One word, "WOW" whats the weight on that SOB? I hope you dont have to ship it to the next event!
"If It Doesn't Overclock Its Broken"
"NexGen Overclocking"
"Overclocking, its a life style"
![Send a message via AIM to [XC] gomeler](images/misc/im_aim.gif)
Damn impressive man. I really hope you can work out the R14 issues. How did NoL make it work yet the two of you are having such huge issues? Would be great to see that baby pull down to -140C
Very impressive. How loud is it?
htpc: i5-760 @4G axp-140; gigabyte p55-usb3; adata 2G x 2; 6950 gelid icy cooler; win7 hp 64bit
game pc: i5-2500k; asrock ext4; adata 4G x 2; 6950 xfire; win7 hp 64bit
getting a temp of -139 is one thing having a unit that does it every time you turn your unit on and can bench with a load on it is where both me and sacha35Damn impressive man. I really hope you can work out the R14 issues. How did NoL make it work yet the two of you are having such huge issues? Would be great to see that baby pull down to -140C
have had problems gomeler
one thing i can say for sure is if we get r14 working in our units we will say exactly how we did it
@annton How loud is it? it was very loud before the panels went on however i have yet to try it with them on
Last edited by bazx; 01-06-2009 at 12:08 AM.
1. The first rule of Bench Club is, you do not talk about Bench Club
2. The second rule of Bench Club is, you do not talk about Bench Club
3. If someone says stop, goes limp, taps out, the the benching is over
4. No bummers in the batcave, apart from unkie dave
5. One Bench at a time
6. No air, no water
7. Benching will go on as long as they have to
8. If this is your first night at Bench Club, you have to Bench
hey whats the weight on it baz? can you lift it? are you using cap tube or a txv on the third stage? how much do you think it cost? how loud is it?
hehe im just playing with you. i hope the txv fixes those frustrating r14 issues
mentally confused and prone to wandering
Spectacular build. Congrats
Indeed a spectacular build!
EK Water Blocks R&D
ekwb.com
Hobby: Rotary SS bench unit (LPG/R-507) | -75°C Auto-cascade (R-600/R-290/R-744) | Plate HX water chiller (1kW cooling power) | My 2nd cascade MP14FB R-507/R-1150 | Mini cascade R-507/R-1150 | GPU single-stage | Mach I restoration mod -> -38°C @ 230W
Milestones: 7.12GHz P4 | 6.84GHz K10.5 | 6.45GHz Ci5 | 3.31GHz K7
3DMark2001SE -> Favourite Game!
i had originally thought it was oil but not any more it works fine with 1150 which off load can get to -115 if there were oil there i would see problems with both refrigerantsIndeed a spectacular build!
august had some success with r14 tev that is whats driving this current experiment
1. The first rule of Bench Club is, you do not talk about Bench Club
2. The second rule of Bench Club is, you do not talk about Bench Club
3. If someone says stop, goes limp, taps out, the the benching is over
4. No bummers in the batcave, apart from unkie dave
5. One Bench at a time
6. No air, no water
7. Benching will go on as long as they have to
8. If this is your first night at Bench Club, you have to Bench
I still think alot of your problems are oil related Bazx.
Hope you get it pulling major ass kicking soon though it seems like it does that more then enough already
If you have a cooling question or concern feel free to contact me.
Cpev
after quite a bit of work with R14 i am beginning to understand its behavior a little better
link to earlier work with a tev and r14
http://www.xtremesystems.org/FORUMS/...d.php?t=214659
i have moved to a cpev (supplied by piotres) setup for the first time and so far i like it
it does not seem to leak at very cold temps altho atm i have not tried one under load
but it installed very easy and pulled down to -132
hp is 8 bar atm but most likely rise to 9 bar under load
vacuum is - 5 but i expect it to settle around 0 also once under load
the evap is a chilly clone but 1/3 longer supplied by cold ice and has 3x 2mm cross holes leading to the suction return near the base
the feed from the cpev is 1/4 and feeds in at the top of the spiral
if you look down the evap you can see the cross drilled return holes
i will be load testing on Saturday with the same AMD rig i used in the tev experiments
Last edited by bazx; 03-05-2009 at 02:52 PM.
1. The first rule of Bench Club is, you do not talk about Bench Club
2. The second rule of Bench Club is, you do not talk about Bench Club
3. If someone says stop, goes limp, taps out, the the benching is over
4. No bummers in the batcave, apart from unkie dave
5. One Bench at a time
6. No air, no water
7. Benching will go on as long as they have to
8. If this is your first night at Bench Club, you have to Bench
-5 inch vacuum
8 bar hp
temp probs fixed at evap wall on the dt and suction return on the fluke
1. The first rule of Bench Club is, you do not talk about Bench Club
2. The second rule of Bench Club is, you do not talk about Bench Club
3. If someone says stop, goes limp, taps out, the the benching is over
4. No bummers in the batcave, apart from unkie dave
5. One Bench at a time
6. No air, no water
7. Benching will go on as long as they have to
8. If this is your first night at Bench Club, you have to Bench
If you do have oil issues it will log up in the cpev after running a bit and temps will drop. Very nice experiment bazx - we're all watching
ron if this fails mate i am going back to R1150
R14 has been a long and costly journey and i need to be nearing the end
also i have found that most oil problems with the refrigerant are at least with my experience linked to high vacuum
if you can control the vacuum and keep it the right side of -10 it tends not to pull oil thro the oil separator
Last edited by bazx; 03-05-2009 at 02:33 PM.
1. The first rule of Bench Club is, you do not talk about Bench Club
2. The second rule of Bench Club is, you do not talk about Bench Club
3. If someone says stop, goes limp, taps out, the the benching is over
4. No bummers in the batcave, apart from unkie dave
5. One Bench at a time
6. No air, no water
7. Benching will go on as long as they have to
8. If this is your first night at Bench Club, you have to Bench
paul came over sunday and we spent the day tunning the unit to work with R14 and the cpev under load
we completed the work with the cpev
and i have my unit stable under load now @-122 which is at around 230w (i used a cpu@1.8v5000mhz with wprime on all for cores and measured the load)
first stage refrigerant has been changed to 404a (this is just a cost saver as i did not need to go to the expense of 507)
i used a 02 orifice on the first stage and a 00 on the second stage which is the r23 tev but this is very close to its maximum and i think i will change this to a 01 orifice soon
the r14 stage needed 11.5 bar hp to hold load which i thought was a little high i had expected it to work @ 9 bar with the r23 stage @ -82 but my gauges might be out a little
one thing i have found with this refrigerant is it wont work in a strong vacuum any more then -10 inch and it wont pull down
under load i have vacuum @ +1 and high pressure at 11.5 bar this give me -122c
ready for some benching now
AMD are sending over a 955 CPU and Gigabyte have supplied a MA790XT-UD4P which is an AM3 setup so that will be my next project
Last edited by bazx; 03-16-2009 at 12:43 PM.
1. The first rule of Bench Club is, you do not talk about Bench Club
2. The second rule of Bench Club is, you do not talk about Bench Club
3. If someone says stop, goes limp, taps out, the the benching is over
4. No bummers in the batcave, apart from unkie dave
5. One Bench at a time
6. No air, no water
7. Benching will go on as long as they have to
8. If this is your first night at Bench Club, you have to Bench
Posting Permissions
Reply With Quote
is the remedy 
Bookmarks