whats highest stable FSB anyone is getting on this board?
i got 480fsb but with 2.25V (2.1 stock) i cant seem to break the 500FSB mark ... has anyone? is it common?
using 1066 dominators
whats highest stable FSB anyone is getting on this board?
i got 480fsb but with 2.25V (2.1 stock) i cant seem to break the 500FSB mark ... has anyone? is it common?
using 1066 dominators
Last edited by Copenhagen69; 09-14-2008 at 10:56 PM.
I topped out @ 495FSB boot from windows. Can use setFSB or aisuite to get to 500FSB but its not stable. Few have gotten this board or any other for that matter to reach 500FSB on a 45nm quad. I finally quit this weekend and settled on 475 X 8 1.35vcore.Originally Posted by Copenhagen69
Praetor
» Intel i7 2600K 3103B306 » Asus Maximus IV Extreme-Z » Asus GTX 470's TRi-SLI » Corsair Dominator GT CMT4GX3M2A2000C8 » Corsair Force F180 SSD » Corsair AX1200 PSU » Corsair 800D
» Cooling : Swiftec Apogee XT » Swiftec MCP350-DDC1 w/XSPC Dual DDC Bay Reservoir » Swiftech MCR320-QP w/Scythe SlipStreams 110CFM
The Yamato
» Intel i7 920 3849B028 or i7 980X » Asus Rampage III Extreme Black Edition » Asus HD6970's QuadFireX or Asus GTX 570's 4way SLI » 6GB Corsair Dominator GT TR3X6G1866C7GTF » Corsair Force F180 SSD » Corsair AX1200 PSU » Microcool Banchetto 101
» Cooling : Dragon F1 Extreme Edition(LN2) » Custom SS by RunMc »
500 Mhz are possible with my Q9550
I need 1,5V NB and I can boot @ 500 Mhz and Bench 3D Mark and all other Benchmarks.
You must mean with quad's, right? And what is stable to you? Orthos, SPI32M etc.
Ci7 990X::Rampage III Extreme::12GB Corsair Dominator 1866C7GT::2 x EVGA SC Titans in SLI::Corsair AX1200::TJ07::Watercooled
Ci7 920 3849B018::Rampage II Extreme::6GB GSKILL Trident 2000C9 BBSE::EVGA GTX580::Antec Signature SG850::TJ09::Aircooled w/TRUE 120X
Hello everybody,
i heard that the voltages from the board are extremly high - also if u use the lowest voltage settings. This should happen if u use a fsb over 450 MHz.
I would like to check this... Do anybody know where are the measure points for different voltages of this board?
nope im running e8400
well stable coule be long enough to run some benchies or 24/7
Hey what voltages are you talking about? What is 2.25v for.
If you are running an E8400, I have hit 560 FSB, but ddr2-1066 is only good for 533. I have tried 570 and 588 but at that bus speed is not stable.
I am using a 7x multiplier for a 3920mhz core speed. My E8400 is not stable over 4000mhz. My DDR2-1200 is running at 1:1 or (560mhz) 1120.
Intel i7 960
EK Waterblocks EK-Supreme HF Full Nickel Rev 2
eVGA Classified 3 X58
Kingston DDR3 1600 12GB black
PNY 470 GTX 3-way SLI
Seasonic 1250watt
Silverstone FT02B
Intel i7 930
Thermalright Ultra 120 extreme 1366
Gigabyte G1.guerrilla 1366
Kingston 1600 12GB black
PNY XLR8 465 GTX
Enermax 1050watt Revolution 85+
CoolerMaster HAF-X
Reply With Quote
Bookmarks