Quote Originally Posted by CryptiK View Post
Try raising the vcore to 1.40v bios first, I'm not convinced its your ram. at 892MHz the ram should be ok.

@ KRich - the PL10 is the lowest you can go on 1:1 divider due to chipset limitation with P45 unfortunately. No way around it.
ok
I will try that as soon as I got my board back
I RMA it today due to the NB temp too high
I got the temp down to 55 C(idle) from 79 C
this is not a cheap board and I should be happy with it
I can't wait to try those setting

thanks