UNOFFICIAL BIOSTAR TPower I45 M/B

[makaka]

how do you have your "Clock Gen Configuration" set up???

it might be wise to set 100ps for cpu skew and 200ps or 300ps for MCH skew control...and...cpu clock driving control at 900mv or 1000mv.

Thanks for notice , tried all possible setting 200 ps and above , . Note the motherboard refuse to boot with PS over 700 .
cpu clock driving control was set to 700-800-900- and 100 mv but no help .
The motherboard can post up to 580 mhz but the most stable is 525 mhz or even a bit lower ,
the LCD screen show SP or C1 and hang usually there
Here is the most that i can get


Please help to archive 570 +stable , when i got this motherboard i was looking for 600x8.5 and yes my cpu can do it
Waiting for more info

current setting :
CPu + 0.35 v
memory +0.3 v (lowring this value is possible)
Chipset +0.35 v (lowring this value is possible - with 0.2v there was no stability problem) . just left this setting to lazy to update it
GTl xxx:0.63
GTL xxx:0.67
GTl MCH : auto
Cpu PLL v : 1.5 or 1.6 do no make any deference .

CPU SKEW 100ps-200 ps or ... 700ps even auto do not make any defernce
MCH SKEW 100ps-200 ps or ... 700ps even auto do not make any deference
Driving Control auto or any other do not make any deference

PLS help