Quote Originally Posted by HousERaT View Post
I was benching 3D last night at 575fsb and my settings are close to what you're advising.

@mattkosem: If Ace's settings don't get you stable try mine:

CPU SKEW 200ps
MCH SKEW 100ps
Driving Control 800mV

PLL voltage 1.6
NBV .350
fsb .325

Memory AUTO
PL 11 (you should be able to do 10 or 9 between 500-530 if you have good ram).

That's all I remember off the top of my head.

These setting are real picky so be prepared to spend some time trying to find out what works for you.

The RaT
Are those safe 24/7 values? +.350 on the NB and +.325 on the VTT seems a bit high. On my 1.1VTT chip, that'd put me at 1.425 (which, IIRC, is .025 past the safe zone). Is the NB safe on that much voltage? Pardon my hesitance, I killed my P35 at 1.7v yesterday.

--Matt