Quote Originally Posted by gallag View Post
beastnotro, System is running fine @1.4v (1.25VID) and I added another 120mm fan, Temps are now 69 max on p95 large for max heat, The rest of my settings are per your template, What other settings could I try to lower?

my stable settings at the minute.

CPU Voltage: 1.4
CPU GTL Voltage Reference (0/2): 0.630
CPU GTL Voltage Reference (1/3): 0.670
CPU PLL Voltage: 1.56
FSB Termination Voltage: 1.28
NB Voltage: 1.26
DRAM Voltage: 1.96
NB GTL Reference: 0.630
SBridge Voltage: 1.10
PCIE SATA Voltage: 1.50
Well one you could leave it alone if all is well.

Or Two

The only things i would lower is the PLL from 1.56 to 1.54 and the NB from 1.26 to 1.24 . again stability may become an issue as it was for me when i did that as linpack would error out.

So its up to you .. i personally would leave it.

I may even try to lower my vcore now to 1.40 as i only did 1.42 in BIOS for absolute stability when i first go rig setup to 3.6ghz as 1.38 was not good so i bumped to 1.42 and left it there...

I may even try Bios 1306 BETA as many say it seems to be good and many can use lower Vcore by 2 notches lower... so if 1.40 is absolute stable say for me then on 1306 bios i hope 1.38 would be.. lol