Quote Originally Posted by WildstarOCT View Post
Blasar - I have the same mobo / mem / CPU as you, my settings are below. You may need more or less VCORE depending on your CPU to get to 3.4. Try setting to something like 1.40 and see if you can boot.

BTW, I use the yellow memory slots. I also found that FSB Termination Voltage & NB Voltage are essential to stability, at least for my setup. You also need more DRAM voltage, I have mine set to 2.02 b/c the mobo is known to overvolt. Finally, make sure to set your Performance Level to 8. Interestingly, I couldn't post when set higher (10).
Thanks for your reply

I´ll gonna try your settings, cross my fingers, and see what happens.

I´m really pissed off with this limitation. Does anyone with this board ever heard of such thing? My system boots only if i choose the 3rd option (starting from the bottom) for the ram frequency, any other option=no boot, no matter the voltages, settings, etc....

Because, if it´s not normal, something must be wrong with the board or with the mems, and if there´s a problem, can RMA be the solution?

Regards.