Quote Originally Posted by Tulū View Post
Ok.
My rams are rated @ 1200MHz @ 5-5-5-18 trfc 33 @2.1V
Btw , 80 mins've passed with no error .

Now i'll apply these :

AI Overclock tuner: manual
CPU Ratio Setting: 8
FSB Strap to North Bridge: AUTO
FSB Frequency: 425
PCI-E Frequency: 100
DRAM Frequency: 1187
DRAM Timing Control: manual

1st Information :

CAS# Latency: 5
DRAM RAS# to CAS# Delay: 5
DRAM RAS# Precharge: 5
DRAM RAS# Activate to Precharge: 18
RAS# to RAS# Delay : AUTO
Row Refresh Cycle Time: 55
Write Recovery Time: AUTO
Read to Precharge Time: AUTO

DRAM Static Read Control: Disabled
DRAM Read Training: AUTO
MEM. OC Charger: AUTO
AI Clock Twister: AUTO
AI Transaction Booster: manual
Common Performance Level [10]

Now , is there any modify needed , waiting for you .
I did not get blend stopped , yet.
Can you do a bandwith test in everest with those settings plz ?... then try to go one setting lower on the ram speed (I never used 425FSB before, no idea which speed it is) and enable static read control, might give ya way better bandwith then ya current settings... also I think a lower pl can be expected then... I'm not at home so I cannot verify them settings...