Quote Originally Posted by Tulū View Post
I got error on god damn core0 again.

@ PortCitySlim , bcause i don't have any experience. I need advices like yours.
What about the others; GTL REFs,PLL ?
I do not mess with GTL Ref at all. For PLL you can go as high as 1.60 and then work your way down to as low as 1.52. My Q6700 has a high VID 1.3250 so I needed 1.41vcore to be stable at 3.4ghz. For 425mhz FSB you should be fine very near 1.26NB, 1.32FSBv and CPU PLL 1.52-1.60. If you are pushing you ram really hard you might need to use more NB but I never did. You need to make sure your CPU vcore is correct by testing with small fft's first for 1 hour at a time lowering each time it passes until it doesn't, then go back up and try to get that to pass about 3-6hours maybe more if you want good stability, I find that I can not pass ram tests with OCCT unless my vcore passes at least 6 hours of small fft's. After I get my vcore set then I switch to OCCT 2 hour Ram test followed by a 12-18 hour blend or mix with either OCCT or Prime95 for final stability.