"ASUS P5Q Deluxe discussion".

[Tulû]

Don't change all at once, how will you know now what helped ? Was it the lower ram clock or the other settings or a mix off...

What was your error now ? was it running them rams way out of spec with too tight latencies and trfc...? have you tried to run them 1278 with 5-5-5-18 Trfc 55 ? if you would like to run them at these speeds think you will need a bit more than 2.12 in bios , I need 2.3 real for just 1200mhz with my Gskills... mine can't even get as far as yours.... you got some nice rams there cherish them

You're right .
I was panicked when it crashed in prime .
As you said , changed lots of settings at once .
When i first installed my rams i wanted to run at 1201 MHz at 2.1V 5-5-5-18 trfc 35 , because they were rated at 2.1V and trfc 33 .
But 35 didn't work and 've tried 40, 40 was OK.
I've ran memtest86+ with no errors .But today while playing a game i got application error and after that tried to run blend test , it gave application error too. After that made the above changings.

Now , it's stable for about 55 mins. ( blend )
rams are @ 1134MHz @ 5-5-5-19 trfc40 @ 2.12V now.

Now , what do you recommend me to do first to change the ram freq. back to 1278MHz ?

Edit : Got error on core0 .

Edit2: Now , set back to 1278MHz @ 2.14V(0.02V increase) @ 5-5-5-19 trfc 60 ( always running at 40 ) .
Stable for about 50 mins.

Edit3: Again error on core0 after 52 mins.

Now raised the NB Voltage to 1.36V . ( was 1.34)