"ASUS P5Q Deluxe discussion".

[Tulû]

Stability is depending on ya own preferences mate, some prefer 12 hours prime small FFT's and then afterwards large, some run an OCCT test cpu and mixed, some do superpi runs, some do benchmarks, some make a mix... if the rig is stable in daily usage and you don't experience any anomalies consider it stable for your usage... I find it absolutely waste of time and cycles to prime for such extended periods but to each his own not even considering the extra load on ya pc's components

I was playing Assassin's creed and it crashed , gave an application error. (something like : memory can't read XXX adress ... )
After it , i ran the " blend " test after a minute prime95 crashed too . Gave an application error.(something like : memory can't read XXX adress )
I've ran three hours small FFTs yesterday and was stable.
I've read somewhere that if it gives an error in blend or large-FFT's, playing with NB,NB GTL REF may work .
Is this true ? What should i do now ?

Edit: My RAM's were rated as 2.1V at 1200MHz at 5-5-5-18 ( trfc 33 ) , but i'm using them at 1278 MHz at 5-5-5-15 ( trfc 40 ) .
I tried to use as def. 5-5-5-18 but gave error again.
Finally i tried to raise the dram voltage by 0.02V = 2.12 V and now it passed to test 4 and there is no error yet.