Quote Originally Posted by Zeus View Post
Leeghoofd, what skew values did you use for RAM?

I used 100ps delay for both channel A (only actually using channel A1) and nothing for channel B.
think it was 150 with my Gskills mate...

Quote Originally Posted by MonsterDK View Post
LLC is disabled.
Fill in the template plz :

P5QDlx Template


Quote Originally Posted by Tulū View Post
Tried to lower the DRAM freq. to 1137MHz and no errors and application error for about 15 mins.
So, what may cause this errors or/and application error ?
NB voltage ? DRAM voltage ?

BTW , i changed the NB GTL REF from AUTO to 0.630.

DRAM Read Training: Enabled ( was AUTO )
MEM. OC Charger: Enabled ( was AUTO )
AI Clock Twister: Lighter ( was AUTO )

I have AI Transaction Booster at AUTO , should i change it to manual ? If yes , to which level should i change ?

Stable for about 25 mins.
Don't change all at once, how will you know now what helped ? Was it the lower ram clock or the other settings or a mix off...

What was your error now ? was it running them rams way out of spec with too tight latencies and trfc...? have you tried to run them 1278 with 5-5-5-18 Trfc 55 ? if you would like to run them at these speeds think you will need a bit more than 2.12 in bios , I need 2.3 real for just 1200mhz with my Gskills... mine can't even get as far as yours.... you got some nice rams there cherish them