Try the settings first, maybe we can bump up to 3.4-3.6 later on... but I think you need better cooling for the quad to keep it cool or run the Zalman flat out...
I just want to know the Vcore required for 3.2ghz... hopefully at or below 1.3Vcore , but that's for you to find out... by testing it a lot... I usually let the CPU run Prime Small FFT's for an hour if it passes I lower Vcore and test again... till it fails, then bump up one or two settings...
If ya find ya correct Vcore then try to run it with eg PLL not at 1.6 but at 1.56, if it fails then go up to 1.58 and test again... it takes some time to know what ya CPU likes and sadly there's no general rule, surely not with 45nm, 65nm is way easier
good luck
Saaya yupp, I agree
Reply With Quote
Bookmarks