Asus M3A32-MVP Deluxe (790FX) *Pictures + Benchmarks + Overclocking*

[tbone8ty]

1.25V on the processor NB is the default voltage, to run my 2 x 2GB Flex II's I need to run 1.2875V. 4GB is a fair load on the NB.
You may not need 2.15V on the ram, always run the lowest you can get away with.
The skew is correct for 800 MHz, higher MHz may require you to adjust the skew.

whats the correct AI clock skew for 1066 memorys?

right now mine is set on auto and in the faded text below each channel it shows "advance 300ps"

im thinking its not a big deal, right?.........


----------------------------------------------------------------------------------------------------

also in the DRAM timings tab it shows:

Auto
DCT 0
DCT 1
Both

which one should i be using to set my timings? does this correspond to the slots that my memory sticks are in?

-----------------------------------------------------------

i have updated the BIOS to 1102 from 801 (used ASUSupdate no problems) and have noticed when it posts now it shows whether the memory is ganged or unganged and 1066 is now 1067. (just a note)