[18th Anniversary] Asus Black Pearl - P5k-Premium Testing Report

[ladderman]

I want to tweak my voltages so I can try to gradually move up to a 9 x400 FSB

The two settings I would like some advice on is the CPU PLL Voltage and the FSB Termination Voltage.

What are the safe max volts for these two settings?

Is the CPU PLL Voltage just beneficial to quad core CPU’s?

To get a stable 9x370 FSB I’ve moved my CPU Voltage to 1.43750v, CPU PLL Voltage to1.50v, and my FSB Termination Voltage 1.30v.

Idle Temp is 24c, and under full load 45c

BIOS Settings
AI Overclocking [Manual]
CPU Ratio Control [Manual]
Ratio CMOS Setting [9]
FSB Frequency [370]
PCI-E Frequency [100]
DRAM Frequency [DDR2-740MHz]
DRAM Timing Control [1T]
CAS# Latency [4]
RAS# to CAS# Dela [4]
RAS# Precharge [4]
RAS# Activate to Precharge [15]
TWR [AUTO]
TRFC [AUTO]
TWTR [AUTO]
TRRD [AUTO]
TRTP ]AUTO]
DRAM Static Read Control [Disabled]

Transaction Booster [AUTO]
Clock Over-Charging Mode [AUTO]

CPU Spread Spectrum [Disabled]
PCIE Spread Spectrum [Disabled]

CPU Voltage [1.43750v]
CPU Voltage Reference [AUTO]
CPU Voltage Damper [Enabled]
CPU PLL Voltage [1.50v]
DRAM Voltage [2.05v]
FSB Termination Voltage [1.30v]
North Bridge Voltage [1.40v]
North Bridge Voltage Ref [ AUTO]
South Bridge Voltage [AUTO]