Quote Originally Posted by KTE View Post
NB voltage? We can't see NB volts, we can only see the VID value. Though I know NB volts rise and fall with VID selection, but they don't rise and fall much by just VID changing unless you push to extremes. I actually want lowest CPU voltage first because it's the biggest temp/power hog, NB voltage can be taken near 1.2VID at least (1.192V) at stock stable, which is OK for me.
I have two settings in my bios prozessor and northbridge voltage. VCore (AOD,CPU-Z) seems to be prozessor voltage and same as CPU VID here (AOD), NB voltage is NB VID(AMD PM).

Quote Originally Posted by KTE View Post
Right now, I've just gamed 30 minutes and then primed stable >5.5 hours (still going) at:
202 x 12 = 2423MHz CPU @ 1.225VID 1.216V idle/1.208V load
202 x 10 = 2020MHz NB @ 1.275VID
Was the system unstable at 202x10 with a higher VID/Vcore?
With 1,2125V Vcore I can reach 204x11 max here. With 1,225V it's 208 (or 206)x11.
Quote Originally Posted by KTE View Post
1.2VID gives me 1.192V idle/1.184V load but 1.075VID will probably give near 1.0V for the IMC. That might b a little too unstable I'll try it though.
I use a 9500 so you might try it with an 11x multi. For 2310Mhz I need 1,25V/1,05V (prime95 stable for 17 minutes). Can be that my low nb requirement has todo with the relaxed memory timings.