Page 2 of 4 FirstFirst 1234 LastLast
Results 26 to 50 of 97

Thread: E8500 739A277 test

  1. #26
    Xtreme Addict
    Join Date
    Mar 2003
    Location
    The Netherlands
    Posts
    1,631
    Very nice Dumo, what shop did you get it from?
    lol... This forum requires that you wait 70 seconds between posts. Please try again in 8 seconds.
    *phone rings*
    Friend: Do you have a spare PSU lying around?
    Me: No why?
    Friend: My PSU just blew up, I think the second 8800GTX might have been too much for it to handle
    Me: what PSU was that again?
    Friend: Antec 480w
    Me:........

  2. #27
    Xtreme Mentor
    Join Date
    Sep 2006
    Posts
    3,246
    Quote Originally Posted by dogsx2 View Post
    I agree. Doesn't matter if retail or ES..... there are duds in both.
    How many people have posted on XS complaining about their dud ES chip, especially during the pre-release or hot-off-the-presses marketing phase?

    The difference is that Intel isn't going to give out "duds" to people who they want to tout their new chips on-line. The ES chips in the marketing build-up are well binned and not necessarily representative of retail. As we have already seen with some people getting less than stellar results with these chips retail already.

    It's just common sense that ES chips passed out for marketing purposes are going to be above average or well above average.
    Last edited by Speederlander; 01-13-2008 at 04:51 PM.
    [SIGPIC][/SIGPIC]

  3. #28
    XIP
    Join Date
    Nov 2004
    Location
    NYC
    Posts
    5,524
    Just for comparo...This retail 8500 from coolaler ran on air...

    Its probly better

    測試諸元:9.5x485=4607MHz
    Vcore:1.48v
    直接進桌面


  4. #29
    Xtreme Addict
    Join Date
    Apr 2005
    Posts
    2,208
    Quote Originally Posted by Speederlander View Post
    How many people have posted on XS complaining about their dud ES chip, especially during the pre-release or hot-off-the-presses marketing phase?

    The difference is that Intel isn't going to give out "duds" to people who they want to tout their new chips on-line. The ES chips in the marketing build-up are well binned and not necessarily representative of retail. As we have already seen with some people getting less than stellar results with these chips retail already.

    It's just common sense that ES chips passed out for marketing purposes are going to be above average or well above average.
    Here is a quote from someone I have a great deal of respect for:

    Quote Originally Posted by mdzcpa View Post
    If you look you can find mediocre ES clocks. No one wants to post about them though
    I have had some I have bought that clocked poorly and they went to Ebay. I did not post in bold letters, like your reply, that I got a dud ES chip. I think that is what most who get their hands on poor clocking ones do.

    Your logic says there are no poor clockers, Intel would not send them out. We know that there are some poor clocking ES chips.

    Sorry Dumo to go OT on your thread.

  5. #30
    Xtreme Addict
    Join Date
    Jun 2006
    Location
    The O.C.
    Posts
    1,451
    Think I got a dud e8400es, lol...but it is an B1 chip, not even a C0. Can't do 4ghz orthos blend stable. Members OBR and godsfist have had pretty poor luck with some retail e8400's too:
    http://www.xtremesystems.org/forums/...d.php?t=172882
    Last edited by LagunaX; 01-13-2008 at 07:58 PM.
    i7-2600k L041C108 4.8ghz 1.32v PLL off Venomous-X Push/Pull http://www.xtremesystems.org/forums/...postcount=1063
    Asus P8P67 Vanilla
    Samsung 30nm MV-3V4G3D/US 2x4GB @ 9-10-10-28 1T DDR3 2133 1.6v http://www.techpowerup.com/forums/sh...d.php?t=159320
    Diamond HD 7970
    WD 600GB Velociraptor
    Corsair TX750W
    CM 690 II Advanced

    Q822A549 E8500 @ 4.5ghz air TRUE @ http://www.xtremesystems.org/forums/...d.php?t=203762

    G.Skill F3-12800CL6D-4GBXH @ 7-10-8-27 1T DDR3 2133 1.6v http://www.xtremesystems.org/forums/...d.php?t=266839

  6. #31
    Xtreme Mentor
    Join Date
    Sep 2006
    Posts
    3,246
    Quote Originally Posted by dogsx2 View Post
    Here is a quote from someone I have a great deal of respect for:



    I have had some I have bought that clocked poorly and they went to Ebay. I did not post in bold letters, like your reply, that I got a dud ES chip. I think that is what most who get their hands on poor clocking ones do.

    Your logic says there are no poor clockers, Intel would not send them out. We know that there are some poor clocking ES chips.

    Sorry Dumo to go OT on your thread.
    Actually, that analysis still backs up my core claim, namely that you can't judge how retail chips will clock based on what people see published with ES samples. Whether they are being binned by Intel because they know the marketing value of good publicity (which pretty much any company would do) or whether the bad ones simply never get posted because all the ES holding people just decide to not share bad runs, either way the result is the same. People read about a lot of great ES results with basically no discussion of the low end, creating an inflated opinion among potential buyers about what to expect.

    That's it. My OT comments are done now as well.
    [SIGPIC][/SIGPIC]

  7. #32
    Xtreme Addict
    Join Date
    Jan 2005
    Posts
    1,730
    Intel doesn't specially bin ES chips ; in fact most are early steppings intended for validation work at mobo manufacturers and ISV.
    Quote Originally Posted by Heinz Guderian View Post
    There are no desperate situations, there are only desperate people.

  8. #33
    Xtreme Member godsfist's Avatar
    Join Date
    Nov 2007
    Posts
    194
    Quote Originally Posted by LagunaX View Post
    Think I got a dud e8400es, lol...but it is an B1 chip, not even a C0. Can't do 4ghz orthos blend stable. Members OBR and godsfist have had pretty poor luck with some retail e8400's too:
    http://www.xtremesystems.org/forums/...d.php?t=172882
    4th time is a charm, I finally got a 4GHz prime stable chip

    But the bastard has one core 15 degrees hotter than the other
    INTEL CORE i7-10700K
    ASUS RTX 5060 Ti 16GB
    ASUS ROG STRIX Z490-E
    ADATA RAM XPG 3600 32GB
    SAMSUNG THE FRAME 65"
    DARK BASE PRO 900 REV2
    BQ PURE POWER 11 600W
    DARK ROCK 4 HEATSINK
    SAMSUNG 990 PRO 2TB
    CRUCIAL X8 SSD 1TB
    ADATA HD-770G 1TB
    SENNHEISER HD569
    OPTUS ULTRA GEN2
    DEATHADDER ELITE
    LOGITECH Z-5500
    LOGITECH K800

  9. #34
    Xtreme Member
    Join Date
    Dec 2007
    Location
    Melbourne, Australia
    Posts
    229
    Quote Originally Posted by godsfist View Post
    4th time is a charm, I finally got a 4GHz prime stable chip

    But the bastard has one core 15 degrees hotter than the other
    What version of Prime are you running? Older versions will only stress one core.
    Core 2 duo E8400 @ 4.2Ghz | Swiftech H20 Apex Ultra Plus | 2GB OCZ Reaper HPC PC8500 @ 1066 4-4-4-4 | 320GB WD + 640GB WD | 512MB 8800GT @ 700/1900 | Antec 900 | 22" Dell E228WFP + 22" Asus VW222U | Logitech G9 + G15 | Asus P5K-E WiFi | Running on a 380W Antec NeoHE
    - Me @ HWBOT

  10. #35
    Xtreme Member godsfist's Avatar
    Join Date
    Nov 2007
    Posts
    194
    Quote Originally Posted by g1raffe View Post
    What version of Prime are you running? Older versions will only stress one core.
    There is a 15 degree difference at idle as well
    INTEL CORE i7-10700K
    ASUS RTX 5060 Ti 16GB
    ASUS ROG STRIX Z490-E
    ADATA RAM XPG 3600 32GB
    SAMSUNG THE FRAME 65"
    DARK BASE PRO 900 REV2
    BQ PURE POWER 11 600W
    DARK ROCK 4 HEATSINK
    SAMSUNG 990 PRO 2TB
    CRUCIAL X8 SSD 1TB
    ADATA HD-770G 1TB
    SENNHEISER HD569
    OPTUS ULTRA GEN2
    DEATHADDER ELITE
    LOGITECH Z-5500
    LOGITECH K800

  11. #36
    Xtreme Addict
    Join Date
    Apr 2005
    Posts
    2,208
    Hope everything is OK. Yellow box still working?

  12. #37
    Registered User
    Join Date
    Dec 2007
    Location
    Cilacap-Indonesia
    Posts
    1

    E8500

    Quote Originally Posted by lukas69 View Post
    I think e8500 retail is best chip for daily use
    it nice, .....
    i like your's machine

    E8500 is best chip & I am planning to replace my E6600 with it

  13. #38
    XIP
    Join Date
    Nov 2004
    Location
    NYC
    Posts
    5,524
    Quote Originally Posted by dogsx2 View Post
    Hope everything is OK. Yellow box still working?
    Yellow box is dead ...Its old though, probly can't keep up with heat load from new gen cpu

    B/way still playing with air and vcore.....



    Same vcore for 4.6G SS....It seems like >5gigers chip if it goes cold, as long as FSB can keep up


  14. #39
    Xtreme Addict
    Join Date
    Apr 2005
    Posts
    2,208
    RIP yellow box..

    Great results Dumo.

  15. #40
    Xtreme Legend
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,242
    Quote Originally Posted by Dumo View Post
    Imo retail and ES are the same

    How high it can scales on FSB ( > 540 FSB)....thats what make a difference
    i agree

    what FSB are you getting with this chip btw
    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?



  16. #41
    Xtreme Addict
    Join Date
    Oct 2005
    Posts
    1,933
    Quote Originally Posted by Dumo View Post
    Imo retail and ES are the same

    How high it can scales on FSB ( > 540 FSB)....thats what make a difference
    Do not tempt us with is aircooling business Dumo, throw that under some ice

  17. #42
    XIP
    Join Date
    Nov 2004
    Location
    NYC
    Posts
    5,524
    @fhpchris....Its just fun to run 4.6Ghz air with $2 HSF, not long ago we need $800 SS or expensive copper pot to do it

  18. #43
    Xtreme Legend
    Join Date
    Jun 2005
    Location
    Taipei, Taiwan
    Posts
    2,310
    Nice to see you bench again.


    YGPM

  19. #44
    XIP
    Join Date
    Nov 2004
    Location
    NYC
    Posts
    5,524
    Thanks Andre

    Sub 10s with untweaked SP1m, 1.49Vcore still on air





    I will try E8500 retail today.
    Last edited by Dumo; 01-15-2008 at 01:27 AM.

  20. #45
    Xtreme Addict
    Join Date
    Dec 2002
    Location
    ithaca, ny
    Posts
    2,431
    fwiw, these es's are also c0, so not much should have changed when moving onto the final releases. back in the conroe days, the final es was b1. despite some that clocked real well, wasn't it said that b2's have a slight edge in spi clock for clock?

    that said, we saw some spectacular g0 es's. first shipping g0's didn't do too well, especially the lower binned ones. but they picked up with time again a fair amount.

    I guess a major part of es is that a "low" bin es might be no different than the top dog
    E8400 8x500=4000 | ABIT IP35-E
    2x2GB Tracer PC2-6400 1:1 500MHz 5-5-5-15 2.0V
    Galaxy 8800GT 800/2000/1100 1.3V | 80GB X25-M G2 + 1.5TB 7200.11 | XFiXG
    Fuzion | MCW60 | DDC2+Petra | Coolrad22T+BIP1

    Merom 13x133=1733 1MB L2 0.950V

  21. #46
    Xtreme Addict
    Join Date
    Mar 2003
    Location
    The Netherlands
    Posts
    1,631

    Thumbs up

    Quote Originally Posted by Dumo View Post
    Thanks Andre

    Sub 10s with untweaked SP1m, 1.49Vcore still on air





    I will try E8500 retail today.
    I hate you
    j/k

    I'm really jealous... still can't get 'em here in NL...damn...
    lol... This forum requires that you wait 70 seconds between posts. Please try again in 8 seconds.
    *phone rings*
    Friend: Do you have a spare PSU lying around?
    Me: No why?
    Friend: My PSU just blew up, I think the second 8800GTX might have been too much for it to handle
    Me: what PSU was that again?
    Friend: Antec 480w
    Me:........

  22. #47
    Memory Addict
    Join Date
    Aug 2002
    Location
    Brisbane, Australia
    Posts
    11,651
    Quote Originally Posted by Dumo View Post
    Thanks Andre

    Sub 10s with untweaked SP1m, 1.49Vcore still on air

    http://img522.imageshack.us/img522/9592/screenshot015xq3.jpg[/img]

    http://img267.imageshack.us/img267/8365/screenshot013od5.jpg[/img]

    I will try E8500 retail today.
    fast for 5-5-5-x timings heh

    my retail needs more vcore to hit clocks that produce similar pi 1m times

    ---

  23. #48
    Xtreme Member
    Join Date
    May 2007
    Location
    Athens - Hellas
    Posts
    444
    nice to see a retail......lets hope they do even or better than the ES ones..
    [SIGPIC][/SIGPIC]

  24. #49
    Xtreme Addict
    Join Date
    Apr 2005
    Posts
    2,208
    Quote Originally Posted by Dumo View Post
    Its just fun to run 4.6Ghz air with $2 HSF, not long ago we need $800 SS or expensive copper pot to do it
    You are so right.

    It is so much more fun to get high clocks and fast spi times without having to use SS or DI.

    Really good clocks for that cooler. Waiting for your retail results.

  25. #50
    Xtreme Addict
    Join Date
    Apr 2005
    Posts
    2,208
    Quote Originally Posted by eva2000 View Post
    fast for 5-5-5-x timings heh

    my retail needs more vcore to hit clocks that produce similar pi 1m times
    He's using better cooling then you.

Page 2 of 4 FirstFirst 1234 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •