ASUS Maximus Formula SE

[devilhood]

Ok I managed to find the fastest base-line setting that isn't too hot for daily usage on air cooling.

Ai Overclock Tuner Manual
OC From CPU Level Up Auto
CPU Ratio Control Manual
Ratio CMOS Setting 9
FSB Frequency 380
FSB Strap to North Bridge 400MHz
PCIE Frequency 100

DRAM Frequency DDR2-1013MHz
DRAM Command Rate 2T
DRAM Timing Control Manual
Primary Info : 4-4-4-9-3-25-5-3
Secondary Info: 7-3-5-4-5-4-5
DRAM Static Read Control Enabled
Ai Clock Twister Strong
Transaction Booster Enabled
Boost Level 0

CPU Voltage 1.37500V
CPU PLL Voltage 1.50V
North Bridge Voltage 1.43V
DRAM Voltage 2.16V
FSB Termination Voltage 1.34V
South Bridge Voltage 1.050V
Loadline Calibration Enabled
CPU GTL Reference 0.63x
North Bridge GTL Reference 0.67x
DDR2 Channel A REF Voltage Auto
DDR2 Channel B REF Voltage Auto
DDR2 Controller REF Voltage DDR2_REF
SB 1.5V Voltage 1.50V

This is with a Q6600 G0 and Crucial Ballistix DDR2-1066 2 GB RAM.
I'm still tweaking but I'm basically trying to keep voltages as low as possible due to 0701 being temp borked.

On Everest, Memory Read was at 9007 MB/s, Memory Write 6934 MB/s, Memory Copy 7681 MB/s and Memory Latency 54.4 ns.