Thanks Brother gonna get one and sdid you use that 3M FRAG TAPE
Thanks Brother gonna get one and sdid you use that 3M FRAG TAPE
SuperMicro X8SAX
Xeon 5620
12GB - Crucial ECC DDR3 1333
Intel 520 180GB Cherryville
Areca 1231ML ~ 2~ 250GB Seagate ES.2 ~ Raid 0 ~ 4~ Hitachi 5K3000 2TB ~ Raid 6 ~
Alittle better but in short......NO!!!Originally Posted by Cascades
SuperMicro X8SAX
Xeon 5620
12GB - Crucial ECC DDR3 1333
Intel 520 180GB Cherryville
Areca 1231ML ~ 2~ 250GB Seagate ES.2 ~ Raid 0 ~ 4~ Hitachi 5K3000 2TB ~ Raid 6 ~
i was running 2.35 volts never any higher.
DFI LTx48t2r:q9650@4ghz:4xOCZ9600FLEX:ATI 3X4870 CFX 840/1100:BFG PHYSX CARD:2x74g RAPTOR RAID 0: DELL 30"+2x2001FP":Corsair hx1000: D800:Logitech G15,G9&Z5500
what's the highest core clock anyone has got on the E6850 with this board on air?
I just ordered some OCZ Flex XTC (PC2 9200) now maybe I'll get the opportunity to see the other half of the Board I have been missing!
SuperMicro X8SAX
Xeon 5620
12GB - Crucial ECC DDR3 1333
Intel 520 180GB Cherryville
Areca 1231ML ~ 2~ 250GB Seagate ES.2 ~ Raid 0 ~ 4~ Hitachi 5K3000 2TB ~ Raid 6 ~
how i envy you guys...I just ordered some OCZ Flex XTC (PC2 9200) now maybe I'll get the opportunity to see the other half of the Board I have been missing!
just having some fun on water with 4gb of ram... benching voltages apply of course...
knocked my 975 chipset cpu score off it's perch by around 100points, not too bad at all..
Allright,
I got all my parts today ...
DFI P35-T2R
2*1 GB Crucial Ballistix Tracer PC8500
Q6600 G0 (woohoo)
Thermalright Ultra-120 Extreme
and other parts are not important
First, I build it, all was set to first boot
I boot, I see the bios and all good .. it's working
Put Vista CD in, it was slow slow slow ... I was almost at the end and bang, error fiule corrupted or something so .. hmmm
Tried Windows XP ...
was slow slow slow ... said wtf
I had my Raptor (OS drive) in the yellow sata .. tried in green sata ... ho it works now fast in XP ... try Vista, same error so .. guess my Vista CD is bad or something gonna try in another PC tommorow.
But well, I install XP and everything is oke, install drivers, all good
So now I go into the bios and set my memory to DDR2-1066 MHZ because it was at 800 by default, also setted the voltage to 2.1 to help a bit. Now I wanted to see if my system was stable at stock settings, try orthos blend, banh after 3 seconds error .. hmmm ... go into bios try 2.2V for the memory, into windows, bang same thing
I putted the memory back to 800 mhz with 2V ... orthos is fine now
So I'm wondering what's going on, it's like my memory can't get at the normal speed it's suppose to do.
Anyone got problem like that with that board ? I have the latest bios btw.
Also my temp (stock speed idle) in SG are
CPU : 18
PWM : 40
CHIPSET : 43
on Core Temp :
Core 0: 30
Core 1: 25
Core 2: 25
Core 3: 30
is it normal ? .. I didn't installed the heatpipe addon yet, will do soon but I got so much problem so I wasn't in mood to install it
It's a lot of question but I want to know if those temps are normal at stock speed. If yes then I can move on the next level ... but need to know about my memory too ...
Anyway, gonna wait some answers from the pro and will make more test after.
Thank for reading and thx for the help too !
EDIT : Well, my pc crashed again at 800 MHZ with 2V .. now at 800 with 1.8v .. I'm trying to figure out what's wrong ... will wait help
Last edited by MacKaquE; 10-10-2007 at 11:45 PM.
im using them, seems mine might be giving me problems, let me know if you can post with stock bios default dram voltage, as mine wont let me anymore, have to swap in another cheap stick of ram then change the voltage to 2.2 just to post.
Andrew
I just ordered some OCZ Flex XTC (PC2 9200) now maybe I'll get the opportunity to see the other half of the Board I have been missing!
DFI LTx48t2r:q9650@4ghz:4xOCZ9600FLEX:ATI 3X4870 CFX 840/1100:BFG PHYSX CARD:2x74g RAPTOR RAID 0: DELL 30"+2x2001FP":Corsair hx1000: D800:Logitech G15,G9&Z5500
Was just testing the new GPU-Z utility by techpowerup (looks up GPU specs).
It stated at PCI-Ex as 16x @ 1x .... WTF !
rechecked it with everest/cpu-z and it confirmed the PCI-Express was running @ 1x ......
Upped the PCI-Express to 110 and now all is well X16
Haven't anyone else encountered the same problem ?
Last edited by SmokeyTheBandit; 10-11-2007 at 10:03 AM.
Cpu: Core i7 930 @ 4.5 Ghz 1.4V (24/7)
Mainboard: Classified E760 @ B3 X58 + EK Waterblock
Memory: 6GB Kingston Hyper @ 2150Mhz 8-8-8-28 -> 1.72V
Graphics Card: HD5870 + EK-Waterblock
Soundcard: Auzentech X-Fi Forte
Boot HDD: WD Velociraptor 300 GB
Stuff HDD: 4x 1TB Samsung HD103UJ @ Raid5 (Perc 5i + 512MB)
PSU: Corsair 1000Watt Modulair
Water Cooling Setup: WC Setup --> Swiftech Apogee XT / Black Ice 360 GTX / 3x Triebwerk TK-122 / 2x DDC 355 Plus + XSPC Dual Top / EK-Spin Bay Reservoir
All build in a Corsair Obsidian 800D
Thanks for the heads up...I will have to check that and see.
20 Logs on the fire for WCG:i7 920@2.8
X3220@3.0
X3220@2.4
E8400@4.05
E6600@2.4
Thx to ppl who didn't answer and totally skipped my post ..
But anwyay I gave a bit more of NB voltage and now everything seems ok, seems that at stock the voltage on the NB wasn't ok
Will try to OC later will post some screens and all
Honestly don't have any recommendations for you. I know this board seems very picky about RAM. My OCZ Titanium seems very very happy though.Thx to ppl who didn't answer and totally skipped my post ..
But anwyay I gave a bit more of NB voltage and now everything seems ok, seems that at stock the voltage on the NB wasn't ok
Will try to OC later will post some screens and all
20 Logs on the fire for WCG:
Right above your post you'll see my temps. For reference I'm aircooled in a Stacker 810 w/ 26C ambient. Most settings were stock, but the FSB's @ 400, so CPU's @ 3200. And that pic was loaded w/ Orthos blend.Thx to ppl who didn't answer and totally skipped my post ..
Hope that helps.
ps. I started @ page 1 and just flipped through everyone else's pictures to compare my Smart Guardian pics w/ their's. 2 variables always make it tough tho...room temp and cooling.
edit: i fail @ forums
Right above your post you'll see my temps. For reference I'm aircooled in a Stacker 810 w/ 26C ambient. Most settings were stock, but the FSB's @ 400, so CPU's @ 3200. And that pic was loaded w/ Orthos blend.
Hope that helps.
ps. go back and look through for other folks SG pics
Well I suggest that you make a permanent signature for future questions so people don't have to go 2-3 pages back to get the info needed.
SuperMicro X8SAX
Xeon 5620
12GB - Crucial ECC DDR3 1333
Intel 520 180GB Cherryville
Areca 1231ML ~ 2~ 250GB Seagate ES.2 ~ Raid 0 ~ 4~ Hitachi 5K3000 2TB ~ Raid 6 ~
Just a little bit mate cuz we don't troub;e shoot LCD & Exacta Mat
SuperMicro X8SAX
Xeon 5620
12GB - Crucial ECC DDR3 1333
Intel 520 180GB Cherryville
Areca 1231ML ~ 2~ 250GB Seagate ES.2 ~ Raid 0 ~ 4~ Hitachi 5K3000 2TB ~ Raid 6 ~
lol
Brother >>>you are A Maroon PITA now...I'm jealous.
20 Logs on the fire for WCG:
Just trying to Overclock you're Mind
Last edited by Brother Esau; 10-11-2007 at 07:54 PM.
SuperMicro X8SAX
Xeon 5620
12GB - Crucial ECC DDR3 1333
Intel 520 180GB Cherryville
Areca 1231ML ~ 2~ 250GB Seagate ES.2 ~ Raid 0 ~ 4~ Hitachi 5K3000 2TB ~ Raid 6 ~
It's working
20 Logs on the fire for WCG:
Alpine Valley East Troy, WI 1989
Last edited by Brother Esau; 10-11-2007 at 08:32 PM.
SuperMicro X8SAX
Xeon 5620
12GB - Crucial ECC DDR3 1333
Intel 520 180GB Cherryville
Areca 1231ML ~ 2~ 250GB Seagate ES.2 ~ Raid 0 ~ 4~ Hitachi 5K3000 2TB ~ Raid 6 ~
You're gonna make me cry man...
20 Logs on the fire for WCG:
THAT's Dear Mr. Fantasy playing..tell me I'm wrong.
Touch Of Gray, Jack Straw, Jack A Roe, Minglewood Blues, Friend Of The Devil, Memphis Blues, Bird Song, Promised Land Sugar Magnolia-> Scarlet Begonias-> Women Are Smarter-> Eyes Of The World-> Drums-> Space-> China Doll-> Dear Mr. Fantasy-> Hey Jude Reprise-> Throwing Stones-> Sunshine Daydream, E: The Mighty Quinn
20 Logs on the fire for WCG:
Posting Permissions
Reply With Quote
Bookmarks