Hehe thanks guys for the kind words

Well i havent make a cascade for long time. A really good friend who is a really gooddd overclocker asked me if i can make one for him. I said ok but you have to wait! I started collecting the parts in the middle of june. Lets take a look at them:

A really big condeser, a huge fan, alco safety device ,two gauges for high pressure, plate hx in a shoebox with foam , flex hose ~1m









The compressors i choose are for first stage 18000btu and for second 12000btu. Gases R507 for the first and R1150 for the second.



The evaporator is a special edition made by eleven. 50mm diameter.


http://www.xtremesystems.org/forums/...12#post2327712
Thanks mike for the support!

A big galvanized plate


Also a small condeser as desuperheater and an auto oilseparator.
And i started soldering the stuff.





My small secret in this cascade is that after many many many many attemps to find the best capillary for 1st stage i finally found it!(I also tried cpev,tev) I used not one but TWO capillaries in parallel. 1,8m x2 0,78 type. I used that cause 1.2 capillary type or 1.5 neither worked ok and with smaller type i had very high pressures. The result is that now i have a very strong first stage and we all know how much important is this. Idle -62c and load -57c to the exit of the hx. High pressure is at load ~14bar at ~25c ambient.


Ethylene came after 20 days of waiting


And i reached -113 with 3,55cm of 0,91 capillary type in second stage.


I hooked it to my 6850es,p5k-e



Very good contact. Take a look where i put the thermal probe. It is the yellow cable.



Some first results cause i still havent tune it
Here at 3600@1,36real idle

and here at little load


Now i fed my processor with 1,87 and i ran some test at ~5250
here at spi 32m


and here at wprime 1024m which uses both cores.


hexus


Superpi 1m .


max cpuz


http://valid.x86-secret.com/show_oc.php?id=239875

I am waiting the top of the case to finish it. I will update when it is ready.
The color will be a very nice red. It is called "Rocky red" and it is paint for expensive cars. Also i have to insulate many pipes and tune the cascade for quad cores.


Thanks for looking-reading and sorry for my really bad english.
Christos