Last edited by Unseen; 09-08-2007 at 04:08 AM.
Wow, is that a record!? How much you wanna sell that chip for?
Amaizing!
what mobo? awesome temps btw. what us temp under load like pi?
QX 9650 5ghz with 1.55v 4.8ghz with 1.5v 24/7 in a VAPOLI V-2000B+ Single stage phase cooling.
DFI LP LT X-38 T2R
2X HD4850's water cooled , volt modded
Thermaltake 1KW Psu
4x Seagate 250GB in RAID 0
8GB crucial ballistix ram
Crazy, Bad Crazy!!
Very fast Christos I will use your combination
very impressive
wow teaser was the right headline...lets see the set up behind this monster
My Custom Pressure/Temperature Charts for Various Refrigerants
QX6700 @ 3900 | EVGA 680i |2 GB Corsair 8500 Dominator | 7800 GT SLi | Silverstone 1KW | Seagate 7200.9 Barracuda RAID 0 + Hitachi Deskstar 2TB RAID 0 | SS Phase w/ Cryostar Evap | MIPS Full Motherboard cooling
My Fake Quad Core is better than your real Quad Core! **cough**Barcelona**cough**
Lian Li Cube Case with Phase and Water DONE!!
unseen have you got a shot of the unit
and the specs
your work has always inspaired me to do better
Baz, what does teaser mean :P He will give you those shots in time, after he's made you work for them
PC: Intel E8400
MB: Asus P5k
PSU: OCZ StealthXStream 600w
GPU: XFX XXX 8800GT
Monitor: Samsung Pebble 17"
Cooling: XSPC Water cooling custom
HDD: 160GB Seagate
RAM: OCZ PC8000 Platinum XTC
Hehe thanks guys for the kind words
Well i havent make a cascade for long time. A really good friend who is a really gooddd overclocker asked me if i can make one for him. I said ok but you have to wait! I started collecting the parts in the middle of june. Lets take a look at them:
A really big condeser, a huge fan, alco safety device ,two gauges for high pressure, plate hx in a shoebox with foam , flex hose ~1m
The compressors i choose are for first stage 18000btu and for second 12000btu. Gases R507 for the first and R1150 for the second.
The evaporator is a special edition made by eleven. 50mm diameter.
http://www.xtremesystems.org/forums/...12#post2327712
Thanks mike for the support!
A big galvanized plate
Also a small condeser as desuperheater and an auto oilseparator.
And i started soldering the stuff.
My small secret in this cascade is that after many many many many attemps to find the best capillary for 1st stage i finally found it!(I also tried cpev,tev) I used not one but TWO capillaries in parallel. 1,8m x2 0,78 type. I used that cause 1.2 capillary type or 1.5 neither worked ok and with smaller type i had very high pressures. The result is that now i have a very strong first stage and we all know how much important is this. Idle -62c and load -57c to the exit of the hx. High pressure is at load ~14bar at ~25c ambient.
Ethylene came after 20 days of waiting
And i reached -113 with 3,55cm of 0,91 capillary type in second stage.
I hooked it to my 6850es,p5k-e
Very good contact. Take a look where i put the thermal probe. It is the yellow cable.
Some first results cause i still havent tune it
Here at 3600@1,36real idle
and here at little load
Now i fed my processor with 1,87 and i ran some test at ~5250
here at spi 32m
and here at wprime 1024m which uses both cores.
hexus
Superpi 1m .
max cpuz
http://valid.x86-secret.com/show_oc.php?id=239875
I am waiting the top of the case to finish it. I will update when it is ready.
The color will be a very nice red. It is called "Rocky red" and it is paint for expensive cars. Also i have to insulate many pipes and tune the cascade for quad cores.
Thanks for looking-reading and sorry for my really bad english.
Christos
Really nice, what about first stage temps idle/load?
Regards
------------------------------------------------------------------------------------------------------------------------------------------------
My Work: LittleDevil's SS Cases, LittleDevil's SS Worklog, LD CPU-R1 Dice/LN² Pots, LD GFX-R1 Dice/LN² Pots,
LittleDevil LD PC-V10, LittleDevil's K-Type Temp Display, |EMAIL: ldphasechange@gmail.com
LD PC-V8 Watercooling Cases: LINK
LD PC-V8 ATX/HPTX Watercoolig PC case with 10 expansion slots: LINK NEW!
-------------------------------------------------------------------------------------------------------------
www.ldcooling.com
Find US on Facebook
Nice but erm
As in 0.78 inches? Thats like 2cm, they don't look that. Is it 0.078? So almost 2mm? If so, wow thats some big capillary. Ever thought of experimenting with 3 or maybe even 4 capillaries?TWO capillaries in parallel. 1,8m x2 0,78 type
PC: Intel E8400
MB: Asus P5k
PSU: OCZ StealthXStream 600w
GPU: XFX XXX 8800GT
Monitor: Samsung Pebble 17"
Cooling: XSPC Water cooling custom
HDD: 160GB Seagate
RAM: OCZ PC8000 Platinum XTC
0,78mm is 0.031 inch
PC: Intel E8400
MB: Asus P5k
PSU: OCZ StealthXStream 600w
GPU: XFX XXX 8800GT
Monitor: Samsung Pebble 17"
Cooling: XSPC Water cooling custom
HDD: 160GB Seagate
RAM: OCZ PC8000 Platinum XTC
That is some Crazy .
SUBSCRIBING TO SHOW THIS TO ALL WHO I KNOW
ʇɐɥʇ ǝʞıl pɐǝɥ ɹnoʎ ƃuıuɹnʇ ǝq ʇ,uop
you are crazy!!!! my air-conditioner is 11000btu!!!!
but....
very very very nice work!!!
AMD Opteron 165 Toledo 2x1 MB L2 socket 939 1800Mhz @ 2836Mhz vcore 1.408v
Cooled By Ybris-Cooling K10
DFI Lanparty UT nF4 Ultra-D
Cooled By Lunasio-Cooling L4E
2 x 1 GB Crucial Ballistix Tracer DDR 500 @ 236 Mhz 3-3-3-8 vdimm 2.62v
Point Of View Nvidia GeForce 7800 GTX 256 MB 430/1200 @ 486(540)/1360
Cooled by Ybris-Cooling K5
2 x 160 GB Western Digital Caviar SE 8 MB Cache RAID 0
OCZ ModStream 520w
Thermaltake Armor Silver Modded!
Samsung 19" 930BF
i love that condencer its perfect
1.87v it has alot of power to take that your friend must be very happy
Nice and clean looking unit and great performance
Favourite game: 3DMark
Work: Muropaketti.com - Finnish hardware site
Views and opinions about IT industry: Twitter: sampsa_kurri
Last edited by Freddie123; 09-08-2007 at 06:09 AM.
PC: Intel E8400
MB: Asus P5k
PSU: OCZ StealthXStream 600w
GPU: XFX XXX 8800GT
Monitor: Samsung Pebble 17"
Cooling: XSPC Water cooling custom
HDD: 160GB Seagate
RAM: OCZ PC8000 Platinum XTC
I hope u took into account the amount of power this system will draw and if a standard household circuit can handle this power draw and also that theres usually 2 to 4 wall plugs on a single breaker so anything else thats drawing power from that breaker is gonna add to the total amount the circuit can handle!
Last edited by _HL4E_HalfLife_; 09-08-2007 at 11:19 AM.
My Rig:
Q6600 2.4Ghz@2.9Ghz Custom Liquid Cooling
ATI X1950XTX 512mb DDR4
MSI 975X Platinum PowerUp Edition
2gb Kingston Hyper-X DDR2 667
Sound Blaster Audigy2
2 IDE HDD, 2 SATA HDD
LG DL16XDVD Writer,52X CDROM
OCZ 520Watt PSU 33Amp +12v
Thermaltake Xaser III case
Logitech Z560 4.1 400watt Surround Sound
3Dmark03-21112
3Dmark05-12154
3Dmark06-8054
Clean job
But lets see that quad perfomance
Töttörööö
Bookmarks