New E6600 batches, post your Overclock

[sreedx2]

I recently bought a xeon 3060 . The batch number if i recall right is 7640A .
I really had a hard time finding a stable OC . and with stable i mean stable .
Lots of times i've seen orthos small fft crash after 12 -16h or more .
I can post at very high frequencies (3.9ghz) with a 'passive' cooled scythe ninja . The cpu never reboots or blue screens and almost always posts . but to get it orthos stable is just not possible and requires crazy voltages .
I'm now at 3290mhz (470x7) with 1.4 in bios . (1.329 load)
the board is a DS3 rev 3.3 .
anyway , to get like lets say 100-200mhz more out of it , i have to up voltage to 1.5 in bios . and even then it will error after 15+ hours orthos .
really hard to find a stable freq .

my E6300 L629B was alot easier and did 3430 mhz with 1.475 in bios (1.39 load). when it wasn't stable it would just blue screen/reboot or not post at all .

thanks for the info

I broke the good e6600 in my sig while removing the IHS, just got this, 7638A760 and it does 3600 at 1.46vcore (bios). temps are good, idles 25 deg and 40 load

are you kidding me , I had a 38F and it was so bad I got rid of it asap