Swiftech
Page 1 of 19 123411 ... LastLast
Results 1 to 25 of 468

Thread: New E6600 batches, post your Overclock

  1. #1
    Xtreme Member sreedx2's Avatar
    Join Date
    Jan 2007
    Posts
    248

    New E6600 batches, post your Overclock

    anyone with a newer Conroe batch please post your Overclock, voltage under load and batch please

  2. #2
    Xtreme Guru
    Join Date
    Aug 2005
    Location
    Burbank, CA
    Posts
    3,808
    newer batches have been bad for me, other people have had good ones, but most are bad.

  3. #3
    Registered User
    Join Date
    Jun 2006
    Location
    Netherlands
    Posts
    30
    So, from when is it called a new batch? a little more specific plz
    Intel core i7 920 @ 3.5GHz undervolted
    Scythe Mugen II
    [RAID0] 2x Intel X-25M 80GB Postville
    Gigabyte X58 UD4P
    9GB DDR3 1333MHz
    Asus 280GTX
    3TB Storage
    Lian Li v2010b
    Antec Truepower Quattro 850Watt

  4. #4
    Xtreme Member sreedx2's Avatar
    Join Date
    Jan 2007
    Posts
    248
    Well I don`t know anything over 35 maybe .. my brother`s 32 is good but I do not know when they started getting worse

  5. #5
    Xtreme Guru largon's Avatar
    Join Date
    Jan 2005
    Location
    Tre, Suomi Finland
    Posts
    3,867
    E6600 L636A229:

    3.5GHz @ 1.413V ORTHOS 10h+ @ 52ºC.
    3.6GHz @ 1.47V ORTHOS 8h+ @ 58ºC.
    Watercooling.

    vCore measured with DMM.
    You were not supposed to see this.

  6. #6
    Xtreme Enthusiast Infa's Avatar
    Join Date
    Apr 2007
    Location
    Sweden
    Posts
    817
    E6600 L644G280

    3.8ghz @ 1.60 (Vdroop) 51c
    4.0ghz @ 1.70 (vdroop) not stable at all

    think maximum is somewhere between 3.8 - 3.9 ghz

    all is on watercooling, i will by a Striker board soon and will see how it works on that, with some more vcore!
    Intel i7 920@ ???| Inno3D 8800GT OC Edition | 3x1 Corsair 1600 DHX | DFI UT-X58 | TT ToughPower 850W

    Watercooling: D-Tek FuZion V2, DDC Ultra Plexi top, PA120.3, MCW60, Ek's Res.

  7. #7
    Xtreme Guru largon's Avatar
    Join Date
    Jan 2005
    Location
    Tre, Suomi Finland
    Posts
    3,867
    Infa,
    I assume that 51ºC @ 3.8ghz 1.6v is an idle temp?
    You were not supposed to see this.

  8. #8
    Xtreme Member
    Join Date
    Feb 2006
    Posts
    489
    my new E6300 is pretty bad. cant really get more than 2.91
    Rig:
    Q6600
    Intel BadAxe2
    Tuniq 120 Tower
    G.Skill HZ 4x1GB
    BFG 7900 GS OC (558/675) now MSI HD 7770
    WD Raptor 150GB (Primary)
    2 x Seagate 320Gb 7200.10 (Storage; No RAID)
    Corsair 620Watt
    Samsung SH-W183 SATA drive
    AuzenTech X-Meridian
    Antec A900 Case


    I have a Tuniq 120 Tower in my new pc. The size, in relation to others on the market, is directly proportional to the size of my penis. Therefore it is large.

    and thick.

  9. #9
    Xtreme Enthusiast Infa's Avatar
    Join Date
    Apr 2007
    Location
    Sweden
    Posts
    817
    Quote Originally Posted by largon View Post
    Infa,
    I assume that 51ºC @ 3.8ghz 1.6v is an idle temp?
    Nope, thats under hours of Orthos , iam Idleing around 20c

    regards
    Intel i7 920@ ???| Inno3D 8800GT OC Edition | 3x1 Corsair 1600 DHX | DFI UT-X58 | TT ToughPower 850W

    Watercooling: D-Tek FuZion V2, DDC Ultra Plexi top, PA120.3, MCW60, Ek's Res.

  10. #10
    Xtreme Guru largon's Avatar
    Join Date
    Jan 2005
    Location
    Tre, Suomi Finland
    Posts
    3,867
    That's very impressive temps you got there.
    What's your ambient?

    You using Coretemp or what for the temp readings?
    You were not supposed to see this.

  11. #11
    Xtreme Addict RealTelstar's Avatar
    Join Date
    Feb 2007
    Location
    Italy
    Posts
    1,328
    The "G" batches seem to be very good

    SB Rig:
    | CPU: 2600K (L040B313T) | Cooling: H100 with 2x AP29 | Motherboard: Asrock P67 Extreme4 Gen3
    | RAM: 8GB Corsair Vengeance 1866 | Video: MSI gtx570 TF III
    | SSD: Crucial M4 128GB fw009 | HDDs: 2x GP 2TB, 2x Samsung F4 2TB
    | Audio: Cantatis Overture & Denon D7000 headphones | Case: Lian-Li T60 bench table
    | PSU: Seasonic X650 | Display: Samsung 2693HM 25,5"
    | OS: Windows7 Ultimate x64 SP1

    +Fanless Music Rig: | E5200 @0.9V

    +General surfing PC on sale | E8400 @4Ghz

  12. #12
    100% Load 24/7 [XC] 4X4N's Avatar
    Join Date
    Mar 2005
    Location
    Seattle
    Posts
    1,499
    You must be running in 10c ambient and have ice water in your loop for those temps with 1.6 vcore.
    Main Rig
    i7 2600k l Asus P8P67 l 2x2gb Gskill l GTS450 l Venomous X l XClio 680

  13. #13
    Registered User
    Join Date
    Dec 2006
    Posts
    50
    L64F040 SL9ZL Malay from newegg about 2 weeks old

    about 3.2ghz max with 1.5v vcore (ty)

  14. #14
    Xtreme Guru largon's Avatar
    Join Date
    Jan 2005
    Location
    Tre, Suomi Finland
    Posts
    3,867
    [XC] 4X4N,
    OR he's using an inaccurate temp monitor software.
    You were not supposed to see this.

  15. #15
    Xtreme Member Getttosmurf's Avatar
    Join Date
    Jan 2006
    Location
    Sweden
    Posts
    329
    nah 1.6v 50c load seems right on the spot with good watercooling gear.
    Im running 1.655v and idle around 36/40 core1/core2 (coretemp or intel tat)
    with load @ 55-58c this with fairly low ambients though 19-20c running dual sp2004 blend prio 9 or 100% load with intel tat for 12hours+
    wc gear in sig
    Q6600 | P35 DQ6 | 4x1GB Ballistix8500 | 8800GT 512 | PC P & P 750w | WC Mcp655, D-tek Fuzion, Maze 4, Bip3 |
    E6600 | Abit AB9 QuadGT | 3x1GB D9GMH | 7900GTO | Silverstone Zeus 850W | Aircooled |
    E2160 | Giga 965 Ds3 | 3x1GB D9HNL | 7600GS Silent |Seasonic s12 600w | Aircooled |

  16. #16
    Xtreme Enthusiast Infa's Avatar
    Join Date
    Apr 2007
    Location
    Sweden
    Posts
    817
    yeeep, iam having good gear, look at my sign.
    and no , not faulty monitoring programs, iam using Coretemp 0.95 (latest)
    and TAT and everest, tat is showing a TAD bit higher temps, but also lower LOAD temps, soo iam just trusting coretemp. and idle is at TOTAL idle 20c, and surfing and usual use its about 25.

    my ambient is 20c soo .. and its lapped, dont think it did so much..but anyway cant hurt

    but i want to get higher, can boot and load windows at 4ghz, but it needs more vcore! and p5b is not giving any more than 1.7....soo striker is coming up!

    Regards
    Intel i7 920@ ???| Inno3D 8800GT OC Edition | 3x1 Corsair 1600 DHX | DFI UT-X58 | TT ToughPower 850W

    Watercooling: D-Tek FuZion V2, DDC Ultra Plexi top, PA120.3, MCW60, Ek's Res.

  17. #17
    Xtreme Member
    Join Date
    Jan 2007
    Location
    Norway
    Posts
    165
    Hmm.. I got a week 32 chip, so I don't know.. :P
    Hasn't Intel made any in 2007? If they have made E6600 chips will the stepping then be L7xxx?

  18. #18
    Xtreme Member
    Join Date
    Oct 2006
    Location
    Orange County, CA
    Posts
    136
    Wow, very nice temps and overclock Infa. It would be amazing if you could hit over 4.0 on the Striker with your setup.

  19. #19
    Xtreme Guru largon's Avatar
    Join Date
    Jan 2005
    Location
    Tre, Suomi Finland
    Posts
    3,867
    Infa,
    Where did you buy your D-Tek FuZion? I'm feeling it's time to upgrade my cpu block.
    You were not supposed to see this.

  20. #20
    Xtreme Enthusiast Infa's Avatar
    Join Date
    Apr 2007
    Location
    Sweden
    Posts
    817
    why would it be amazing?

    it boots and crashes at 4ghz when iam trying to stress it ...and it can handle surfing and superpi at it... its that tad of vcore it needs to be stable! 1.80 maybe! and it wont overheat at it either ...so i dont see the problem, just happiness well well ..sallory isnt due to 25:th so i will have to hold my horses until then cheers!
    Intel i7 920@ ???| Inno3D 8800GT OC Edition | 3x1 Corsair 1600 DHX | DFI UT-X58 | TT ToughPower 850W

    Watercooling: D-Tek FuZion V2, DDC Ultra Plexi top, PA120.3, MCW60, Ek's Res.

  21. #21
    Xtreme Enthusiast Infa's Avatar
    Join Date
    Apr 2007
    Location
    Sweden
    Posts
    817
    Largon,

    I did buy it from petra's aswall as the mcw60 block.
    maybe iam in for the Apogee GTX block, but i want to see nikshub's testing first to be really sure i have become OC addictive! hehehe this is bad for my karma and economy :P
    Intel i7 920@ ???| Inno3D 8800GT OC Edition | 3x1 Corsair 1600 DHX | DFI UT-X58 | TT ToughPower 850W

    Watercooling: D-Tek FuZion V2, DDC Ultra Plexi top, PA120.3, MCW60, Ek's Res.

  22. #22
    Xtreme Mentor mascaras's Avatar
    Join Date
    Oct 2005
    Location
    Portugal
    Posts
    3,414
    Quote Originally Posted by Getttosmurf View Post
    nah 1.6v 50c load seems right on the spot with good watercooling gear.
    Im running 1.655v and idle around 36/40 core1/core2 (coretemp or intel tat)
    with load @ 55-58c this with fairly low ambients though 19-20c running dual sp2004 blend prio 9 or 100% load with intel tat for 12hours+
    wc gear in sig


    yep , my E6600 L628B (B = HOT) with 130€uros watercooling Kit


    E6600@ 3600mhz --- Temps FULL







    Ontopic: anyone already tested a L639F ????



    regards
    Last edited by mascaras; 04-14-2007 at 12:21 PM.

    [Review] Core i7 920 & UD5 » Here!! « .....[Review] XFX GTX260 216SP Black Edition » Here!! «
    [Review] ASUS HD4870X2 TOP » Here!! «
    .....[Review] EVGA 750i SLi FTW » Here!! «
    [Review] BFG 9800GTX 512MB » Here!! « .....[Review] Geforce 9800GX2 1GB » Here!! «
    [Review] EVGA GTX280 1GB GDDR3 » Here!! « .....[Review] Powercolor HD4870 512MB GDDR5 » Here!! «

  23. #23
    Xtreme Addict Garrett's Avatar
    Join Date
    Mar 2003
    Location
    The Netherlands
    Posts
    1,634
    Those are extremely LOW temperatures for full load... omg.... what wc kit is it anyway? specs plz
    and IHS still on?
    lol... This forum requires that you wait 70 seconds between posts. Please try again in 8 seconds.
    *phone rings*
    Friend: Do you have a spare PSU lying around?
    Me: No why?
    Friend: My PSU just blew up, I think the second 8800GTX might have been too much for it to handle
    Me: what PSU was that again?
    Friend: Antec 480w
    Me:........

  24. #24
    Xtreme Member Getttosmurf's Avatar
    Join Date
    Jan 2006
    Location
    Sweden
    Posts
    329
    largon vcore.dk has the d-tek fuzion a little closer to where you live = ) about 100$ though
    Q6600 | P35 DQ6 | 4x1GB Ballistix8500 | 8800GT 512 | PC P & P 750w | WC Mcp655, D-tek Fuzion, Maze 4, Bip3 |
    E6600 | Abit AB9 QuadGT | 3x1GB D9GMH | 7900GTO | Silverstone Zeus 850W | Aircooled |
    E2160 | Giga 965 Ds3 | 3x1GB D9HNL | 7600GS Silent |Seasonic s12 600w | Aircooled |

  25. #25
    Xtreme Enthusiast Infa's Avatar
    Join Date
    Apr 2007
    Location
    Sweden
    Posts
    817
    And Coolerkit.dk has the GTX

    and well with 3.6 i can lower my vcore to that too! heh and get that temps! OC it over that vcore and he will NOT get that TEMP!
    Intel i7 920@ ???| Inno3D 8800GT OC Edition | 3x1 Corsair 1600 DHX | DFI UT-X58 | TT ToughPower 850W

    Watercooling: D-Tek FuZion V2, DDC Ultra Plexi top, PA120.3, MCW60, Ek's Res.

Page 1 of 19 123411 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •