Quote Originally Posted by G.S Technician View Post
yes it works for p5n32-e plus, however, since motherboard will auto pick up the SPD or EPP, it might not boot up with 2 sticks. that is becasue the voltage too low. for vnb, vtt,vht are nothing i can help. you can ask around for it. i will suggest you test with FSB1066/ddr2 1000 to make sure ram is working no problem
thanks!

I've done more testing and i'm pretty sure it's the board.

This is SO unusual but it works fine at 2000/1000 linked 1:1 and has no problems with superpi 32M.

if i set it at 1600/1000 unlinked (effectively 4:5) windows crashes.

so I can run 3.5 ghz 1:1 7 x 500 but can't run 3.6 ghz 4:5 9 x 400.

the next question you'll probably ask is, can my chip do 3.6? i'm using more than enough voltage to do 3.6.

i'll keep testing and i'll also see if the board will boot with one stick. i tried one stick yesterday but it wouldn't work.

if it doesn't work with one stick, is there anyway to get the SPD reprogrammed to something like 5-5-5-15 ddr2-533?