Quote Originally Posted by shimmishim View Post
Couple of questions. I have the 8000HZ's.

1. Do the settings above work for the P5N32-E SLI PLUS? I assume so.

2. Will the board boot with one stick in this board? I seem to have problems getting into the bios with 1 stick. The SPD for the stick is programmed for 4-4-4-5 @ 500. No other SPD's are programmed.

3. Any tips on vNB, vtt, vHT?

I've been messing around with this mem for a day now and cannot get these set to do superpi 32M w/o rebooting my computer. If I set DDR2 to 800 4-4-4-5 then it works fine. Any attempt at 500 FSB crashes my computer.

Thanks.
yes it works for p5n32-e plus, however, since motherboard will auto pick up the SPD or EPP, it might not boot up with 2 sticks. that is becasue the voltage too low. for vnb, vtt,vht are nothing i can help. you can ask around for it. i will suggest you test with FSB1066/ddr2 1000 to make sure ram is working no problem