Quote Originally Posted by calves View Post
Hello everybody, am new to the forum and this is my 1st post


sync mode: ENABLE

Ai overclock Tuner: MANUAL
OC from CPU level up: AUTO

CPU Ratio setting: 21
CPU Turbo power limit: ENABLE

Cpu configiguration:

BCLK Freq: 190
PCIE Freq: 103
Dram Freq: DDR3-1523MHZ
UCLK Freq: 3046
QPI Link Data Rate: AUTO

Memory Configuration protect: DISABLE
Dram timing Control --> set timings to manual eg 8-8-8-24 andTRFC to 88

Cpu Differential Amplitude: AUTO
CPU clock skew: AUTO
IOH Clock skew: AUTO


Digi+ pwr mode: X-POWER
pwm volt control: AUTO
Load-line calibraction: AUTO
CPU voltage OCP: ENABLE
CPU PWM Freq: AUTO

Extreme OV: DISABLE
Extreme OC: AUTO

CPU voltage: 1.32
CPU pll voltage: 1.81525
QPI/Dram core voltage(vtt): 1.35 (try to lower later)
Dram Bus voltage: 1.65
IOH voltage: 1.20575
IOH pcie voltage: AUTO
ICH voltage: 1.20575
ICH pcie voltage: AUTO

CPU spread spectrum: DISABLE
PCIE spread spectrum DISABLE

________________________________

CPU Ratio Setting: 21
C1E Support: DISABLE
Hardware Prefetcher: DISABLE
Adjacent Cache Line Prefetch: DISABLE
Intel Virtualization Tech: DISABLE
CPU TM Function: DISABLE
Intel HT Technology: ENABLE
Active Processor Cores: ALL
A20M: DISABLE
Intel SpeedStep(TM) Tech: DISABLE
Intel C-STATE Tech: DISABLE
Try the above plz... I can boot and be stable at 227 Bclock with my crap 950... no other board has done that here (not Xpower, not UD9)