Quote Originally Posted by dnottis View Post
Load-Line Calibration - enabled
CPU Vcore - 1.34xx (dont recall which one, but it's one of the 1.34 options)
CPU Termination - 1.26v
CPU PLL - 1.57
CPU Reference - .838

MCH Core 1.26v or 1.28v
MCH Reference .838
MCH/DRAM Refernce AUTO
ICH I/O - lowest selectable
ICH Core - lowest selectable

DRAM Voltage - 1.82v
DRAM Termination - AUTO
Channel A Ref - AUTO
Channel B Ref - AUTO

also can you try 8X500 ?
Yep but my chip doesn't like 500. It boots but it's very unstable.
well my multi is 8 on my Q so i got it stable at 500X8 but with 1.44v on CPU Termination & MCH Core the only ones i set are those and CPU Vcore & DRAM Voltage the rest I set to Normal

Quote Originally Posted by ghost_recon88 View Post
Use .63x as the multipler for figuring out GTLs.

VTTx.63=GTL voltage

So, if VTT is 1.20, do 1.20x.63=75.6v, or in this case you would chose .76v in the GTL list. Same method and format goes for the NB. Using that formula I was able to get a CPU-Z validation with my Q9550 at 555FSB on air
whats GTL Voltage & VTT ? CPU Termination