Quote Originally Posted by BRSG View Post
Ok... 11 hours completely stable cpu running prime95 with SmallFFT's! With MemTest for windows also zero errors with these settings:


AI Overclock tuner: Manual
CPU Ratio Setting: 8.0
FSB Strap to North Bridge: 333
FSB Frequency: 450
PCI-E Frequency: 101
DRAM Frequency: 1081
DRAM CLK Skew on Channel A1: AUTO
DRAM CLK Skew on Channel A2: AUTO
DRAM CLK Skew on Channel B1: AUTO
DRAM CLK Skew on Channel B2: AUTO
DRAM Timing Control: Manual (timings: 5-5-5-15)

CPU Voltage: 1.33125
CPU GTL Voltage Reference (0/2): 0.67
CPU GTL Voltage Reference (1/3): 0.67
CPU PLL Voltage: 1.56
FSB Termination Voltage: 1.24
DRAM Voltage: 2.14
NB Voltage: 1.30
NB GTL Reference: AUTO
SBridge Voltage: 1.20
PCIE SATA Voltage: 1.60

@truehighroller: For now I'll let it running folding@home and later tonight when I get home let's see if windows crashed or not! If not I'll try to reduce DRAM Voltage to 2.12 and will run prime 95 again, but this time with blend test!

After that, and if all goes well after 2/3 days, I'll try your suggestions
Bad thing is with you having your vfsb so high that if you sit there and burn it in at that high spot 1.24 for 3.6GHZ it can burn it self into that spot and want to stay set that high but, it's ok it is your chip. I have mine set to 1.22 and it won't run below it now "overclocked I mean". I just figured if you are going to be running that low 3.6GHZ all the time then you might want to burn it into a lower spot then that, that's all.