7900GT 1.4v mod

**Zyprex^^** · 03-31-2006, 10:24 AM

Hi! Im soon (tomorrow i think) getting a new 7900GT card, and I'm planing to do a 1.4v mod.

So then i ask you guys, is it something I should be carefull for? I know how to do the mod.

And this is a discussion thread for the mod too.

Btw, Im going to use a tin wire and fix it with some tape.

**mascaras** · 03-31-2006, 10:28 AM

I made the 1.40v mod today and its fine , i use liquid conductive ink , and tape , after the mod i mesure with multimeter and i got 1.39v.

I have watercooling and my temp with MOD its 30/31c idle and 33/34c Fulll load.

Now i can get 650 mhz in the core.

The Mod its easy if you use tape , after the Mod mesure the voltage with multimeter .

regards

**Zyprex^^** · 03-31-2006, 10:33 AM

Ok. In the start I'm only using stockcooler, but I'll give some water to my computer in the future:P

**mascaras** · 03-31-2006, 10:46 AM

with stokcooler you shouldnt do the MOD , even only with 1.40v MOD and stokcooler the cards get 70/80c LOAD

**Zyprex^^** · 03-31-2006, 10:58 AM

hmm.. not good. I'll se whats the temps are when I get the card. I just hope that I get a card that has a super-stockcooler:P

**Zenjirou** · 03-31-2006, 11:02 AM

BFG GTs comming today. Plan to do the mod with Wire and solder, as I have never heard of conductive ink and do not know where to buy.
Easist mod ever

**lowfat** · 03-31-2006, 12:23 PM

Originally Posted by Zenjirou

BFG GTs comming today. Plan to do the mod with Wire and solder, as I have never heard of conductive ink and do not know where to buy.
Easist mod ever

The white 'dot' that you solder too the solder won't stick too btw. I tried soldering but i ended up taping the wire to the dot.

**Zenjirou** · 04-01-2006, 03:17 PM

Got them. Tried the V mods using Foil and tape,.
stuck at 562mhz, which is what i had w/o the mod. using coolbits inside nvidia propeties to oc. fails after 562..