Originally Posted by prepared View Post
I am Korean, and Parkoz member,
Sorry for my English, I translate the key instruction.
How to Enable the CrossFire in Crysis
You must confirm this is not the Official patch of Crysis Tek.
I am not responsible for any risks on your system.
Your PC must support CrossFire with XP or Vista.
This is tested with the Driver Catalyst 8-43-1-1-071113a-055589E.
Vista Users must install the HotFix, KB936710, KB945149.
Follow the instructions
i) uninstall the Driver for HD 3870, shotdown your PC
and remove the Secondary VGA Card of HD3870 from the slot on your MainBoard.
ii) Boot on Safe Mode and uninstall the HD 3870 Driver with the Cleaner
and reboot your PC on Normal Mode and reinstall the Driver I used.
iii) Shotdown your PC and install the secondary HD3870 Card on your mainboard,
and Turn on your PC and install the driver by the following.
When you execute Catayst setup file, it overwrites the files for Primay Card,
so you must install the driver using the driver update button with the OS Device manager
Now, You will meet the message box meaning like
[The CrossFire does not work because of Disconnection of the CrossLink cable.]
Don't worry this message, this means you've done well.
iv) Shut down your PC and connect the CrossLink Cable, and Turn on your PC, and
Enable CrossFire on CCC, and You can hear the sound When OS recognizes some PnP Devices
and you run 3DMark and check the CrossFire works well.
v)
install Crysis SP Demo.
Backup the Folder of Crysis SP Demon\Game\Config.
uninstall Demo.
install the Retail Version of Crysis.
Overwrite the backuped folder to the installed Dir.
run ConSole window and Type r_MultiGPU and Press Enter key.
0 means CrossFire off, 1 means on, 2 is auto
Now, enjoy the game.
This method works in XP, Vista 32bit and Vista 64
but does not works in DirectX 10.
Why they missed the config option in the retail version?
Bookmarks