Some of the pics were posted in a previous worklog. But I changed hardware enough I think to start up a new one.
Forgot to take a pic of the case before I started to butcher it. But it is a Lian Li PC-A77F.
http://lian-li.com/v2/tw/product/upl...7f/a77f-05.jpg
Originally I was going to do a 2p AMD G34 system. But decided to move to Intel before ever actually using the board. Pic of the old board.
The blocks I bought specifically for it. Won't be using these either now.
Coolgate 420 w/ some BGears adapters. I love those adapters.
The nasty stuff out of the radiator. This is from the 4th or 5th flush. Never saved the gunk from the first 3 or so flushes.
Big pile of sleeving.
Recrimped the Gentle Typhoons for the radiator.
Here is my 'floating' reservoir.
Various radiator/fans/reservoir pics.
Finally reorganized all my modding supplies. Can't believe I used individual baggies for the past few years.
Wanted something unique for my tubing, MDPC-X Grand Bleu it is!
Now to add the coolant I mixed up. Added it to the radiator just for some pics.
This is the colour scheme I was planning on going w/ to match the AMD board. A friend was doing a very similar build so these cables didn't get wasted thankfully.
Checks out a-o-k on my trusty PSU checker.
About here is where I realized I wanted to go w/ Intel and convert this thing in to a gaming machine, not just a server. Going to need more radiators! But space was an issue so I needed something very slim up top. I had a Magicool 2x140mm slim laying around but unfortunately it is the wrong spacing.
So I took out the drill and drilled in to the radiator for new mounts. I slipped up a few times and drilled in to the rad, but thankfully I missed all the important stuff. :gasp:
It fits! Need to find some good black counter sunk screws methinks.
Well I guess it don't fit after all. :sad:
Got my EK blocks and backplates in. No real pics of the blocks yet.
One of Supremes.
And playing around w/ the coolant again.
One of the nekkid GTX680s. This is the Galaxy card. Nice black PCB. My other card, MSI Twin Frozr is a nasty brown. It definitely will be my bottom card.
Only pic I have of the block installed. :haha:
Backplate mounted on one of the cards.
Finally was able to afford the new board. Asus Z9PE-D8 WS.
Cleaned up my older Supreme HF. I guess Ice Dragon Cooling nanofluid leaves a residue on the blocks. Was able to polish it clean though.
Upon further comparision. This made me rather angry. Having to spend another $50 after shipping to get matching screws. :facepalm:
Mmmmm. Shade 19, where have you been my entire life?
Crimped the new 24-pin. DSLR battery had died so I used my iPhone to take the pic. :blush:
Shade 19 + Grand Bleu.
Cut off all the tabs off the sides of the 5.25" bays. They looked awful. I plan get some panels cut to cover up the sides of the bays.
Using my trusty nibbler to make it more cable management friendly. Also tapped a few new holes for cable management clips. Still have a bit to do here as you can see.
Did a few cuts in order to get the radiator to fit.
Yes! xD
Barely fits. Already putting a lot of pressure on the connector.
Test fitting one of the cards.
That is all for now.
Bookmarks