A not 100% stable OC ?
A not 100% stable OC ?
Question : Why do some overclockers switch into d*ckmode when money is involved
Remark : They call me Pro AsusSaaya yupp, I agree
Out of nowhere my board does the double boot again.Anyone else have that happen?
Finally got 1600 8 8 8 24.Originally Posted by ChanceCoats123
1866 cas 9 = 1600 cas 8. Go with whichever you want.
1600 8 8 8 24 is the same performance that 1866 9 10 9 28 ?
8 cycles @ 800MHz (the command clock is not doubled like the data rate) = 10ns
9 cycles @ 933Mhz = 9,65ns
So 1866 wins in both absolute latency and bandwidth. But better than teorizing is running some benchs yourself.
Thank you very much, but I don't get stable 1866 9 10 9 28 2T
I test with 1,1 VCCIO and 1,5625 VDIMM and nothing helps. Prime cause bsod at seconds to begin.
(Sorry for my bad English)
You'll probably need some more RAM voltage to get beyond 1600MHz. Everything up to 1.65V is most likely (do your research to be sure) fine for both memory and the IMC.
I can do 50 passes with LinX but fail in Blend test in Prime95
Asus P8P67 PRO B3 | Intel Core i5 2500K @ 4.6GHz | 4GB G.Skill Ripjaws X DDR3-2133MHz | OCZ Vertex 3 120GB Max IOPS | 2x 1.5TB WD Green
1GB Asus Radeon HD 5850 | Thermalright Venomous X Push/Pull | Corsair HX750w | Corsair Obsidian 800D | Dell U2311H | Windows 7 Ultimate x64 SP1
for me prime needs a little more vcore than linx
1st: i7 2600K@4,6Ghz@1,28 Vcore || Asus MIVE Rev.3 || Bios 3208 || 2 x 4096 MB Corsair Vengeance || Asus GTX 580 CU II || WC with Koolance-370 || EK-VGA Supreme HF || Mora3 Pro
2nd: i7 2600K@4,6Ghz@1,32 Vcore || Asus MIVE-Gene Z68 || EVGA GTX 280 || 2 x 4096 MB ADATA XPG G Series v2.0 || WC with - EK-Supreme HF Full Nickel || VGA HK || Mora2 Pro
5,0 Ghz LinX_Stable_Club
LinX + AVX?
Got LinX stable for 5hours @4700, my 24/7 speeds
i7 2600K Batch L039B470.
Asus Maximus IV-Gene-Z
Single Stage
RipJawsX 4gb 2133 7-9-7-27-1T
H2O 6970
_______________________________________
no, still @vista 64bit
1st: i7 2600K@4,6Ghz@1,28 Vcore || Asus MIVE Rev.3 || Bios 3208 || 2 x 4096 MB Corsair Vengeance || Asus GTX 580 CU II || WC with Koolance-370 || EK-VGA Supreme HF || Mora3 Pro
2nd: i7 2600K@4,6Ghz@1,32 Vcore || Asus MIVE-Gene Z68 || EVGA GTX 280 || 2 x 4096 MB ADATA XPG G Series v2.0 || WC with - EK-Supreme HF Full Nickel || VGA HK || Mora2 Pro
5,0 Ghz LinX_Stable_Club
Have anyone tried the 1606 bios for P8P67 deluxe ? any impressions ?
Thanks ,
2600k@4.8Ghz
Asus P8P67 dlx (1254)
G.skill RipJaws X 4X2GB 1600mhz CL8-8-8-21
HD5450
Samsung HD103UJ X3
Intel X25-M 80GB SSD
Hec Zephyr 650W
Antec P182
Anyone can share bios 1301 for WS revolution?
i7 2600K Batch L039B470.
Asus Maximus IV-Gene-Z
Single Stage
RipJawsX 4gb 2133 7-9-7-27-1T
H2O 6970
_______________________________________
How is the new 1608 bios doing for people?
Rig 1:
ASUS P8Z77-V
Intel i5 3570K @ 4.75GHz
16GB of Team Xtreme DDR-2666 RAM (11-13-13-35-2T)
Nvidia GTX 670 4GB SLI
Rig 2:
Asus Sabertooth 990FX
AMD FX-8350 @ 5.6GHz
16GB of Mushkin DDR-1866 RAM (8-9-8-26-1T)
AMD 6950 with 6970 bios flash
Yamakasi Catleap 2B overclocked to 120Hz refresh rate
Audio-GD FUN DAC unit w/ AD797BRZ opamps
Sennheiser PC350 headset w/ hero mod
I've updated bios to 1606 and now pc hangs while windows logo comes up. Lights on keyboard and mouse flicker then go out. Forced to reboot and then the same again. Tried going back to an earlier bios but it's still the same? anyone any ideas?
New System : I5 2500K, P8P67 Pro, 2gig Cellshocks 1800 (some ripjaws on order), 2x Powercolor 4870's, 120gig Vertex 3 SSD, Corsair AX 1200W PSU, Swiftech Watercooling.
Old System : QX9650 @ 450x9.5 (4275ghz), Maximus Extreme (Bios 1001), 2gig Cellshocks 1800 1:2 (7-7-7-15), 2x Powercolor 4870's, X-fi, 2x 32gig Mtron SSD's (Raid 0), Antec 1KW Quattro PSU, Swiftech Watercooling.
Got it sorted. Got so bogged down today, at some stage did not power 2nd gfx card! Doh.. Seems okay now.. next to overclocking!!
New System : I5 2500K, P8P67 Pro, 2gig Cellshocks 1800 (some ripjaws on order), 2x Powercolor 4870's, 120gig Vertex 3 SSD, Corsair AX 1200W PSU, Swiftech Watercooling.
Old System : QX9650 @ 450x9.5 (4275ghz), Maximus Extreme (Bios 1001), 2gig Cellshocks 1800 1:2 (7-7-7-15), 2x Powercolor 4870's, X-fi, 2x 32gig Mtron SSD's (Raid 0), Antec 1KW Quattro PSU, Swiftech Watercooling.
guys anyone knows if Asus has ever stated if this mobo series will be able to work with the future IvyBridge?
---
---
"Generally speaking, CMOS power consumption is the result of charging and discharging gate capacitors. The charge required to fully charge the gate grows with the voltage; charge times frequency is current. Voltage times current is power. So, as you raise the voltage, the current consumption grows linearly, and the power consumption quadratically, at a fixed frequency. Once you reach the frequency limit of the chip without raising the voltage, further frequency increases are normally proportional to voltage. In other words, once you have to start raising the voltage, power consumption tends to rise with the cube of frequency."
+++
1st
CPU - 2600K(4.4ghz)/Mobo - AsusEvo/RAM - 8GB1866mhz/Cooler - VX/Gfx - Radeon 6950/PSU - EnermaxModu87+700W
+++
2nd
TRUltra-120Xtreme /// EnermaxModu82+(625w) /// abitIP35pro/// YorkfieldQ9650-->3906mhz(1.28V) /// 640AAKS & samsung F1 1T &samsung F1640gb&F1 RAID 1T /// 4gigs of RAM-->520mhz /// radeon 4850(700mhz)-->TRHR-03 GT
++++
3rd
Windsor4200(11x246-->2706mhz-->1.52v) : Zalman9500 : M2N32-SLI Deluxe : 2GB ddr2 SuperTalent-->451mhz : seagate 7200.10 320GB :7900GT(530/700) : Tagan530w
AFAIK it just requires a BIOS update for support.
Can u resolve this problem ? I have same problem with my new mobo ?
||[b] Intel i7 4770K @ Phanteks PH-TC14PE || Asus Maximus VI Hero || 16 GB Gskill TridentX @ 2400MHz || CoolerMaster CosMoS S II || Asus GTX 780 @ AC Accelero Xtreme III[size=1]|| 24" BenQ XL 2410T @ 120HZ || 256GB Samsung 840 Pro || WD Green 1 TB , WD Green 2 TB || OCZ ZX 1000W || @ [size=1]|| Creative SoundBlaster Zx - Logitech Z-2300 || Logitech G19 || Logitech G700s|| [/color] ||
disable c1 c3 c6 and u will be happy
1st: i7 2600K@4,6Ghz@1,28 Vcore || Asus MIVE Rev.3 || Bios 3208 || 2 x 4096 MB Corsair Vengeance || Asus GTX 580 CU II || WC with Koolance-370 || EK-VGA Supreme HF || Mora3 Pro
2nd: i7 2600K@4,6Ghz@1,32 Vcore || Asus MIVE-Gene Z68 || EVGA GTX 280 || 2 x 4096 MB ADATA XPG G Series v2.0 || WC with - EK-Supreme HF Full Nickel || VGA HK || Mora2 Pro
5,0 Ghz LinX_Stable_Club
Is there any way to roll back to a previous bios?
running 1202 (ws revolution)
i7 2600K Batch L039B470.
Asus Maximus IV-Gene-Z
Single Stage
RipJawsX 4gb 2133 7-9-7-27-1T
H2O 6970
_______________________________________
New bios for the deluxe was just uploaded to the FTP : 1702 ,
could`nt find a changelog , it was yet to be updated in the site .
Anyone care to try ?
2600k@4.8Ghz
Asus P8P67 dlx (1254)
G.skill RipJaws X 4X2GB 1600mhz CL8-8-8-21
HD5450
Samsung HD103UJ X3
Intel X25-M 80GB SSD
Hec Zephyr 650W
Antec P182
I downgraded sucessfully from 1502 to 1305 by using AMI's utility:
http://hardforum.com/showpost.php?p=...postcount=2343
Yep, working so far , so good...no problems @all here
Last edited by DStealth; 06-07-2011 at 09:45 AM.
Thanks, will try that out
edit;
Got it done
Last edited by Bullu$; 06-09-2011 at 01:56 AM.
i7 2600K Batch L039B470.
Asus Maximus IV-Gene-Z
Single Stage
RipJawsX 4gb 2133 7-9-7-27-1T
H2O 6970
_______________________________________
Hello.
you guys squeak coil power processor? at high voltage in the order of 1.45v is this phenomenon?
particular model, I mean pro p8p67 rev.3
thanks in advance
Posting Permissions
Reply With Quote
Bookmarks