for info purpose ill add this maybe we can figure something out : I have my SSD in the top white port nothing in the 2nd all other drives are in the black ports 2-DVDs / 2HDs, I have the ram set to 1866/ 101.0 fsb in slots 2&4 just to allow better air flow to the bottom of the cpu cooler I guess

all C-states/EIST/CPU thermal to disable, I wasn't aware of a jumper of any kind so it must be in stock pos. the open case setting is disabled, ram settings to turbo and the other is quick, XMP 1/ PLL overvolt 1.

Im kinda lost why you unplug your PSU? mine has been plugged in since the build. also what is the jumper for?

2 days ago I had my 1st crash while gaming in a week (code 0124) set Vcore up but I feel that was me trying to run at1.27v core now set to 1.280v RAM is set to 1.50v if I raise it to much or try to OC the ram over 102.0 it will crash 9/10 times after 20-30min. @ 9-10-9-28 T1

I have ran LinX for 20+ times any times over not an Issue. Only tried Prime 95 once since I hate it with a passion and figure if its going to crash it will crash with linX or Wprime , vantage, 3Dmark11 I have not had 1 single loop or failed OC since f3C w/PLL disabled now with F3g it is enabled and has been since the day it was posted. I feel pretty confident everything is stable ATM. so if you would like me to try something let me know and we will find out in the AM. it just confuses me as to why some are having troubles and Im not, when its the same board and bios,CPU, it just has to be some setting we are missing. hope this helps in some small way.