Quote Originally Posted by skuldarin View Post
sorry fort he late reply. it was prime stable for about 3 and a half hours (woke up to a room that had gone to about 90 degrees from comp). as for my uncore, i didn't play around with it enough but it was 1 knotch above the lowest setting and was just to get it stable.

voltage wise, bios / evo set to 4.0625 but with 100% LLC it fluctuates upto about 4.125 at the most. i'm gonna load up 0003 to and tweak it abit more and try to get it even more stable. the biggest challenge will be getting it thermally stable through this summer >.<
Wow 4v, insane One of the strong points of 32nm Gulfies is that their Vtt requirements are lower than Bloomfields (generally speaking here) and you should be able to get it up over 3400MHz pretty easily. Uncore is IMC as well as L3 cache, so it can have a large impact on some tasks.

Quote Originally Posted by spoolindsm127 View Post
Sorry for the super late reply

I fed it up to 1.41875v and kept getting BSODs early in LinX testing. I was suspecting heat to be the problem. It was .

The solution was a combination of BIOS 1207 and -2.7c Chicago night Spring weather

Needed 1.4v Vcore and 1.256v QPI.

http://img51.imageshack.us/i/45ghzlinx.png
http://img864.imageshack.us/i/45ghzlinx2.png


Feels good to finally be part of the club
Nice job on 4.5GHz What is even more awesome to me, is that ram speed/timings! DDR3-1716 MHz 6-6-6-18, nice.