sorry fort he late reply. it was prime stable for about 3 and a half hours (woke up to a room that had gone to about 90 degrees from comp). as for my uncore, i didn't play around with it enough but it was 1 knotch above the lowest setting and was just to get it stable.Originally Posted by CryptiK
How's prime running? Would be surprised if you are getting a few errors in LinX but can pass Prime without any. I only test with full memory with LinX, no point testing it with less as it's too weak and not diagnostic.
Why is your uncore so low? You can gain plenty of performance getting that up to where it should be
Lastly, when you quote voltages, what are your real load voltages as per CPU-Z (vcore) and everest (everything else)? BIOS voltages are not real voltages and are not what your processor is running at.
voltage wise, bios / evo set to 4.0625 but with 100% LLC it fluctuates upto about 4.125 at the most. i'm gonna load up 0003 to and tweak it abit more and try to get it even more stable. the biggest challenge will be getting it thermally stable through this summer >.<
Reply With Quote
Bookmarks