***Asus Rampage III Extreme Owners Thread***

[CryptiK]

well... 24 hours and still kickin at 4.509ghz @ 1.40625 vcore, 1.3375v QPI, 155x29 w/ 2954 uncore (1866 @ 7-9-7-24-72 2T w/ 1.73575v)



http://valid.canardpc.com/show_oc.php?id=1728694

for now i can't push any further as temps during full load is in low 90's. though it seems nothing i have on my computer is even capable of pulling more than about 45% load and temps haven't gone over 59*c across the board.

it'll pass just about all LinX tests i throw at it but full mem is still showing some errors within the first 10-15 rounds.

How's prime running? Would be surprised if you are getting a few errors in LinX but can pass Prime without any. I only test with full memory with LinX, no point testing it with less as it's too weak and not diagnostic.

Why is your uncore so low? You can gain plenty of performance getting that up to where it should be

Lastly, when you quote voltages, what are your real load voltages as per CPU-Z (vcore) and everest (everything else)? BIOS voltages are not real voltages and are not what your processor is running at.

i think there's something wrong with my mainboard... for the past 2 hours i've finding what's wrong, it doesnt se no more 6 gb, only 4! cpu z and everest says that i've got 3 modules, but bios windows, airflow pro, asus ocs and cpu gadget say's i'm using only 4 gigs!! what tha hell is goin on?! i've update to 1207, no way, the problem still persist..... please guys help me to know what's wrong now, i'm a stock speed on cpu and ram... but WWWWWWWWWHy is telling 4gb nonsense?????

Could have dropped a stick, tested them individually? If they all check out one by one, try re-seating them and if that doesn't work re-seat the CPU.

I am now at 4.5ghz 1.35vcore prime stable.

I refuse to push for higher clocks considering my temps.

Once water cooled i will try for 5ghz.

Awesome, got some screen shots?