here is the thing with that Vread point, its that it doesn't go through the capcitators, there is a voltage read point on the back of the board, but its on the back of the socket, that one is good for a O-Scope reading and shoudl be the same as the choke one with a DMM. There is another one where the error correction for e the PWM is, but that one you don't want to try to hit, its very hard to hit a pin/resistor nexto or on the PWM.

I found with prior BIOSes that LLC1 drops like 20mv under load from what you set so its pretty good. What I will do is do some more testing, but the choke is pretty good, and easy to hit while the PC is on.

I will do some testing tonight becuase I have time. CN what is the new BIOS you used for the LLC testiong?

Even with older BIOSes Vcore was read low/high with cpu-z i forget which is was about a 20mv difference though from the real voltage.