Quote Originally Posted by Mathemagician View Post
I was getting x124 at idle/light load for a while, also. It was apparently due to insufficient voltage at lower loads. You can tune it out by easing up on the LLC and bumping the offset.
What I was trying to say in my previous post. If load is stable but idle or off-idle is not increase the offset voltage. If the final load voltage is considerably more then necessary drop down to the next lower LLC level. Doing this may require bumping offset even more to bring the loaded voltage back to where stability is. This won't have a large effect on idle voltages because they increase considerably less then the loaded values per offset step.