ASUS P8P67 Pro/Evo/Deluxe OC discussion thread

[orion23]

@Sam_oslo ..yep that's what I'm getting ( BSOD ) @ idle or "light-loads"
@orion23 .. I need about the same V for my chip so i'm just curious what you come up with
here is @ X48 (1.00V idle, 1.4V load ):
AI Overclock Tuner = Manual
BCLK/PEG Frequency = 100
Turbo Ratio = Per Cores = 48
Internal PLL Overvoltage = Enabled
Memory Frequency = DDR3-1866
EPU Power Saving Mode = Disabled
DRAM Timing Control = 8-9-8-24-1T
Load Line Calibration = Ultra High
Phase Control = Extreme
Duty Control = Extreme
CPU Voltage = Offset Mode = .030V
DRAM Voltage = 1.55V
Just change CPU capability to 110% I like to see if that makes any difference

Almost identical settings, except for:

CPU capability : 130%
Offset mode voltage: + .050 (tried .040 and .045 and it crashed on me within 30 seconds...)

This results in a voltage load of up to 1.434 using Linx....
up to 1.408 using Prime95 Small FFts

I could reduce the offset for Linx, but then Prime95 will fail.

Using a different LLC, such as medium, I need about a +110 offset setting.

BTW, I've been using my PC nonstop for the past 2 days and no BSOD for me using the offset mode even with the Ultra High LLC!