***Asus Rampage III Extreme Owners Thread***

[RyziLLa420]

Is the TP-LINK WIRELESS N 300M PCI ADAPTER compatible with this board?

(here is a link so some pictures and info if needed) http://www.ple.com.au/ViewItem.aspx?...CategoryID=390

cheers

[x-built-Stan]

Does anyone know of software that can be used to dynamically tune the memory on the X58 chip? I used to use nTune on the nForce chips.

[fgw]

Does anyone know of software that can be used to dynamically tune the memory on the X58 chip? I used to use nTune on the nForce chips.

have a look at memset to change timings on the running system,

or SPDTool to reprogram the spd of your dimms.

[x-built-Stan]

have a look at memset to change timings on the running system,

or SPDTool to reprogram the spd of your dimms.

Thanks - got it - CPU-tweaker

[lowbid]

Is the TP-LINK WIRELESS N 300M PCI ADAPTER compatible with this board?

(here is a link so some pictures and info if needed) http://www.ple.com.au/ViewItem.aspx?...CategoryID=390

cheers

I have been using the D-Link DWA-556 on this board and a 680i with no problem.

[x-built-Stan]

Has anyone has Turbo EVO stop working? When I start mine it looks like its running (in task manager), but the window never comes up. I even tried uninstalling and re-installing and resetting the system to the defaults.

[theseeker]

I am about to start building my new system and I have a question relating to SLI and the recommended configuration. The manual recommends using slot 1 and 3 for SLI, but can I use slot 2 and 4 instead?
The reason is that I am considering an OCZ Revo SSD for slot for the x4 slot and MB will be inverted so my H20 blocks on VC's will not be visible if I have to use slot 1 and 3.
TIA