Thanks for opening the thread illuminati-hwt.

A lot of people have PM'd me and asked for my bios settings.
Hopefully they will help or get you in the ball park.

Quote Originally Posted by LagunaX View Post
@crossg:

Hey could you post your UEFI Bios settings?

Got my SB already just waiting for my P8P67 and Thermalright 1156 mounting kit to arrive...
Here ya go. No Guarantees or warranty.

Thanks SBB. Modified it a bit.

"AI Tweaker" Page"
AI Overclock Tuner = Manual
BCLK/PEG Freq = 100
Memory Frequency = 1600mhz or whatever freq your Mem is.
OC Tuner. Disabled
EPU Power Saving = Disabled
EPU Settings. Disabled
Dram Timing Control. Set to memorys SPD timings.
Internal PLL overvoltage = Enabled (You need the latest bios for this option!) Latest bios 1053

CPU Power Management
CPU Ratio - Manual
Turbo Ratio = By All Cores
By all cores = 50
Turbo Mode = Enabled
Load Line Calibration = Ultra High
VRM Spread Spectrum = Disabled
VRM Frequency = Manual
VRM Fixed Freq Mode = 370
Phase Control = Extreme
Duty Control = T.Probe
CPU Current Capability = 120%
Dram Voltage = Set to Memory spec.

CPU Voltage = Manual - 1.375v to start for 5000 Ghz. May require more or less. Be careful with the voltage
All other voltages = Auto

Advanced -> CPU Configuration Page
CPU Ratio = 50
Intel Adaptive Thermal Monitor = Enabled
Hyper-Threading = Enabled
Active Processor Cores = All
Limit CPUID Maximum = Disabled
Execute Disable Bit = Enabled
Speedstep = Disabled
Turbo = Enabled
C1E = Enabled
C3 = Disabled
C6 = Disabled

All power saving features off.

Really a lot of this is guess work but it's pretty easy to get good clocks compared to my 980X and Rampage board.