***Asus Rampage III Extreme Owners Thread***

[BSViper]

Damn it..

My cpu + mb can do only 212 bclk...
218 - no boot, 217 - no boot to windows, 216 - can do screenshot, but crash at any test (BSOD), 215 - partial stable, but hang on prime, 214 - same, 213 - after 10 minites test also hang up...

CPU: I7 920

CPU Settings:
CPU Ratio setting..........................:x18
C1E Support.................................:disab
Hardware Prefetcher.....................:Enab.
Adjacent Cache Line Prefetch.........:Enab.
MPS and ACPI MADT Ordering.........:Modern.
Intel(r) Virtualization Tech...............:Enab.
CPU TM Function.............................:dis.
Execute Disable Bit..........................:Enab.
Intel(r) HT Technology.....................:Enab.
Active Processor Cores.....................:All
A20M.............................................. :disab.
Intel(r) Speedstep(TM) Tech.............:disab.
Intel(r) Turbo Mode Tech..................:disab.
Intel(r) C State Tech*.......................:disab.
*C State package limit setting............:N/A
*C1 Auto Demotion...........................:N/A
*C3 Auto Demotion...........................:N/A

Bus settings:
BCLK Frequency.................................:212
PCIE Frequency..................................:101
Dram Frequency.................................:1723
UCLK Frequency..................................:3408
QPI Link Data Rate...............................:7218

Voltage:
CPU Differential amplitude..........................:700mV
CPU Clock Skew.........................................:norm al
IOH Clock Skew..........................................:Nor mal.
Extreme Engine Digi+
Digi+ Power Mode.......................................:t-balance
PWM Voltage Control...................................:Auto
Load-Line Calibration...................................:50% Calib
CPU Voltage OCP.........................................:Enab.
CPU PWM Frequency....................................:Auto .
Extreme OV................................................ .:disab.
Extreme OC................................................ .:Auto.
CPU Voltage........................................... ......:1.325v
CPU PLL Voltage........................................... .:1.802v
QPI/DRAM Core Voltage.................................:1.375v
DRAM BUS Voltage.........................................:1 .565v

All others - auto..

And my memory have stable settings - she can do 2000 Mhz..

Can anyone give me some advice, what i can do to achieve more high bclk?