hey guys, im reached my limit with this OC due to tempurature. just wondering if anyone thinks theres anything that could be changed for the better. mainly the voltages. i know i could just use the process of elimination whats holdin me back is i dont understand the relationship that some voltages have with each other. e.g if u use more qpi vtt u might be able to get lower vcore.

Advanced CPU Features:
CPU Clock Ratio ................................ [23]
Intel(R) Turbo Boost Tech ...................... [Disabled]
CPU Cores Enabled .............................. [All]
CPU Multi Threading .............................[Enabled]
CPU Enhanced Halt (C1E) ........................ [Disabled]
C3/C6/C7 State Support ......................... ["]
CPU Thermal Monitor ............................ ["]
CPU EIST Function .............................. [Enabled]
Virtualization Technology ...................... [Disabled]
Bi-Directional PROCHOT ......................... ["]

Uncore & QPI Features:
QPI Link Speed ..............................[36] 7.05 ghz
Uncore Frequency ............................[16]=3136
Isonchronous Frequency ......................[Disabled]

Standard Clock Control:
Base Clock (BCLK) Control .......................... []
BCLK Frequency (MHz) ................................[196]
PCI Express Frequency (MHz) ........................ [100]
C.I.A.2........................................... .. [Disabled]

Advanced Clock Control:
CPU Clock Drive ..............................[800]
PCI Express Clock Drive ................... [900]
CPU Clock Skew ............................. []
IOH Clock Skew ............................. []

Advanced DRAM Features:
Performance Enhance ...................... [Turbo]
Extreme Memory Profile (X.M.P) ........... [Disabled]
System Memory Multiplier (SPD) ........... [8]=1568
DRAM Timing Selectable (SPD) ............. []

Channel A + B + C

Channel A Timing Settings:
##Channel A Standard Timing Control##
CAS Latency Time ......................[8]
tRCD ..................................[7]
tRP ...................................[8]
tRAS ..................................[20]
CR.....................................[2t]
B2B.....................................[]


Advanced Voltage Control:
CPU Intel Core i7 920 D0 Stepping
Load Line Calibration ................. [2]
CPU Vcore ..............................[normal 1.13 + 0.275] cpuz shows 1.408 on load, 1.216 idle
QPI/VTT Voltage 1.150v .................[1.38]
CPU PLL 1.800v .........................[auto]
PCIE 1.500v ...........................[auto]
QPI PLL 1.100v ........................[auto]
IOH Core 1.100v .......................[1.38]
ICH I/O 1.500v ........................[auto]
ICH Core 1.1v .........................[1.34]

DRAM
DRAM Voltage 1.500v .............. [1.66]
DRAM Termination 0.750v.......... [AUTO]
Ch-A Data VRef. 0.750v ...........[AUTO]
Ch-B Data VRef. 0.750v ...........[AUTO]
Ch-C Data VRef. 0.750v ...........[AUTO]
Ch-A Address VRef. 0.750v ........[AUTO]
Ch-B Address VRef. 0.750v ........[AUTO]
Ch-C Address VRef. 0.750v ........[AUTO]