**Gigabyte GA-X58A-UD7 OC-Tips-Bios-Discussion Thread**

[_AntLionBR_]

you need to push qpi/vtt over 1.5v most likley between 1.5-1.6v. Not worth it IMO.

This value for 1800MHz (1.50~1.60v), there would be a somewhat exaggerated value which is analyzing a Gunftown?

The UD7 is good with bclk, have you tried dropping the CPU multiplier and raising bclk? The 2:8 memory multiplier and 215bclk will get your memory to 1720mhz and keep your CPU at 4.5ghz. I dont have a 980x but this is what I run on the Bloomfield.

Yes I have downloaded the blck and increased the multiplier (150 * 30 for example). 1700MHz with 1.375v I've got to QPI, 1800MHz now I can not in any way, even increasing the QPI to 1.455v. But I will try other combinations here, thanks for the reply.

PS: Which setting you use for 215bclk stable, could pass? Thanks again!